Hi Hekio,
å¨ 2015/8/8 6:46, Heiko Stübner åé:
> Hi Yakir,
>
>
> I think this Rockchip portion is missing a devicetree binding.
Oh, thanks, I would complete it in next ;)
> You have the ability to power down the actual edp phy by using
> grf_edp_iddq_en from GRF_SOC_CON12. This is similar to how the
> rk3288 usb-phy gets put into a deeper state. So maybe you could
> provide a phy driver (drivers/phy) for this similar to what the
> exynos-dp does.
Okay, so I need to add a new phy-rockchip-dp.c, include
power_on/power_off ops, thanks.
>
> Some more stuff inline. But I guess by no means complete, as I'm
> still trying to integrate this into my development-tree.
>
>
> Am Freitag, 7. August 2015, 05:46:20 schrieb Yakir Yang:
>> Rockchip have three clocks for dp controller, we leave pclk_edp
>> to analogix_dp driver control, and keep the sclk_edp_24m and
>> sclk_edp in platform driver.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v2: None
>>
>> drivers/gpu/drm/rockchip/Kconfig | 10 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 419
>> ++++++++++++++++++++++++ 3 files changed, 430 insertions(+)
>> create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig
>> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..096ed77 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
>> for the Synopsys DesignWare HDMI driver. If you want to
>> enable HDMI on RK3288 based SoC, you should selet this
>> option.
>> +
>> +
> nit: double blank line
Done,
>
>> +config ROCKCHIP_ANALOGIX_DP
>> + tristate "Rockchip specific extensions for Analogix DP driver"
>> + depends on DRM_ROCKCHIP
>> + select DRM_ANALOGIX_DP
>> + help
>> + This selects support for Rockchip SoC specific extensions
>> + for the Analogix Core DP driver. If you want to enable DP
>> + on RK3288 based SoC, you should selet this option.
> [...]
>
>
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
>> index 0000000..2f86e5e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * Rockchip SoC DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
>> + * Author: Andy Yan <andy.yan at rock-chips.com>
>> + * Yakir Yang <ykk at rock-chips.com>
>> + * Jeff Chen <jeff.chen at rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include <linux/component.h>
>> +#include <linux/clk.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#include <drm/bridge/analogix_dp.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#define encoder_to_dp(c) \
>> + container_of(c, struct rockchip_dp_device, encoder)
>> +
>> +#define plat_data_to_dp(pd) \
>> + container_of(pd, struct rockchip_dp_device, plat_data)
>> +
>> +/* dp grf register offset */
>> +#define DP_VOP_SEL 0x025c /* grf_soc_con6 */
>> +#define DP_REF_CLK_SEL 0x0274 /* grf_soc_con12 */
>> +
>> +#define GRF_DP_REF_CLK_SEL_INTER BIT(4)
>> +#define DP_SEL_VOP_LIT BIT(5)
>> +
>> +struct rockchip_dp_device {
>> + struct drm_device *drm_dev;
>> + struct device *dev;
>> + struct drm_encoder encoder;
>> + struct drm_display_mode mode;
>> +
>> + struct clk *clk_dp;
>> + struct clk *clk_24m_parent;
> this clk_24m_parent does not seem used at all
Done,
>> + struct clk *clk_24m;
>> + struct regmap *grf;
>> + struct reset_control *rst;
>> +
>> + struct analogix_dp_plat_data plat_data;
>> +};
>> +
> [...]
>
>> +static int rockchip_dp_init(struct rockchip_dp_device *dp)
>> +{
>> + struct device *dev = dp->dev;
>> + struct device_node *np = dev->of_node;
>> + int ret;
>> +
>> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
>> + if (IS_ERR(dp->grf)) {
>> + dev_err(dev,
>> + "rk3288-dp needs rockchip,grf property\n");
>> + return PTR_ERR(dp->grf);
>> + }
>> +
>> + dp->clk_dp = devm_clk_get(dev, "clk_dp");
> I've looked at the manual, but couldn't find an actual clock-name
> used there. Is it really "clk_dp" or should it just be "dp"?
This should be "clk_dp", not "dp".
Cause analogix_dp_core would need a clock name with "dp", so I would
rather to pasted my rockchip-dp node here before I add dt-bindings in
next version ;)
edp: edp at ff970000 {
compatible = "rockchip,rk3288-dp";
reg = <0xff970000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
PCLK_EDP_CTRL>;
clock-names = "clk_dp", "clk_dp_24m", "dp";
rockchip,grf = <&grf>;
resets = <&cru 111>;
reset-names = "dp";
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
hsync-active-high = <0>;
vsync-active-high = <0>;
interlaced = <0>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
ports {
edp_in: port {
#address-cells = <1>;
#size-cells = <0>;
edp_in_vopb: endpoint at 0 {
reg = <0>;
remote-endpoint = <&vopb_out_edp>;
};
};
};
>> +
>> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> Same here, maybe "dp_24m".
Like my previous reply. And actually as those two clocks all have
a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
them to "sclk_dp" & "sclk_dp_24m", is it okay ?
>
>> + if (IS_ERR(dp->clk_24m)) {
>> + dev_err(dev, "cannot get clk_dp_24m\n");
>> + return PTR_ERR(dp->clk_24m);
>> + }
> I think you're missing the pclk here (PCLK_EDP_CTRL) or is this part of
> something else?
Whops, as I refered in commit message I leave pclk_dp to
analogix_dp_core driver ;-)
The reason why I want to leave pclk is I thought this clock is more like
analogix dp
core driver want, like a IP controller clock (whatever analogix_dp do
need a clock
named with "dp").
>
>> +
>> + dp->rst = devm_reset_control_get(dev, "dp");
>> + if (IS_ERR(dp->rst)) {
>> + dev_err(dev, "failed to get reset\n");
>> + return PTR_ERR(dp->rst);
>> + }
>> +
>> + ret = rockchip_dp_clk_enable(dp);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = rockchip_dp_pre_init(dp);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "failed to pre init %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
> [...]
>
>> +static int rockchip_dp_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *panel_node;
>> + struct rockchip_dp_device *dp;
>> + struct drm_panel *panel;
>> +
>> + panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
>> + if (!panel_node) {
>> + DRM_ERROR("failed to find rockchip,panel dt node\n");
>> + return -ENODEV;
>> + }
> Personally I would prefer to continue with the of-graph framework to
> attach the panel instead of defining a special node. But I'm not
> authorative on this. But that way the dts could then look like [0].
>
> I've sucessfully modified the driver currently in use in Chromeos for my
> dev-tree and have ported this change over onto your driver [1].
Wow! looks very nice, and really appricate for your ported code ;)
BTW should I rebase on your patch, or can just take your code in my next
version :-)
Thanks a lot,
- Yakir
>
> [0]
> https://github.com/mmind/linux-rockchip/blob/devel/somewhat-stable/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#L76
> [1]
> ---------- 8< -------------
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> index e7cf9ab..24e872d 100644
> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -20,6 +20,7 @@
> #include <linux/component.h>
> #include <linux/clk.h>
> #include <linux/mfd/syscon.h>
> +#include <linux/of_graph.h>
> #include <linux/regmap.h>
> #include <linux/reset.h>
>
> @@ -335,14 +336,28 @@ static const struct component_ops
> rockchip_dp_component_ops = {
> static int rockchip_dp_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> - struct device_node *panel_node;
> + struct device_node *panel_node, *port, *endpoint;
> struct rockchip_dp_device *dp;
> struct drm_panel *panel;
>
> - panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
> + port = of_graph_get_port_by_id(dev->of_node, 1);
> + if (!port) {
> + dev_err(dev, "can't find output port\n");
> + return -EINVAL;
> + }
> +
> + endpoint = of_get_child_by_name(port, "endpoint");
> + of_node_put(port);
> + if (!endpoint) {
> + dev_err(dev, "no output endpoint found\n");
> + return -EINVAL;
> + }
> +
> + panel_node = of_graph_get_remote_port_parent(endpoint);
> + of_node_put(endpoint);
> if (!panel_node) {
> - DRM_ERROR("failed to find rockchip,panel dt node\n");
> - return -ENODEV;
> + dev_err(&pdev->dev, "no output node found\n");
> + return -EINVAL;
> }
>
> panel = of_drm_find_panel(panel_node);
> ---------- 8< -------------
>
>
>
>
