[PATCH] drm/exynos: fix vsync interrupt clear routine of mixer

[Joonyoung Shim]

INT_EN_VSYNC bit is not used when we clear vsync interrupt but
INT_STATUS_VSYNC bit should be related.

Also, if we want to enable vsync interrupt, we should write 1 in
INT_CLEAR_VSYNC bit before we set INT_EN_VSYNC bit. It will clear prior
vsync interrupt. You can check it from exynos mixer user manual.

Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
---
 drivers/gpu/drm/exynos/exynos_mixer.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c 
b/drivers/gpu/drm/exynos/exynos_mixer.c
index cae98db..60538bf 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -739,15 +739,14 @@ static irqreturn_t mixer_irq_handler(int irq, void *arg)
                        atomic_set(&ctx->wait_vsync_event, 0);
                        wake_up(&ctx->wait_vsync_queue);
                }
-       }

 out:
-       /* clear interrupts */
-       if (~val & MXR_INT_EN_VSYNC) {
                /* vsync interrupt use different bit for read and clear */
-               val &= ~MXR_INT_EN_VSYNC;
+               val &= ~MXR_INT_STATUS_VSYNC;
                val |= MXR_INT_CLEAR_VSYNC;
        }
+
+       /* clear interrupts */
        mixer_reg_write(res, MXR_INT_STATUS, val);

        spin_unlock(&res->reg_slock);
@@ -907,6 +906,7 @@ static int mixer_enable_vblank(struct exynos_drm_crtc *crtc)
        }

        /* enable vsync interrupt */
+       mixer_reg_write(res, MXR_INT_STATUS, MXR_INT_CLEAR_VSYNC);
        mixer_reg_writemask(res, MXR_INT_EN, MXR_INT_EN_VSYNC,
                        MXR_INT_EN_VSYNC);

-- 
1.9.1