On Tue, Aug 02, 2016 at 02:52:53PM -0400, Lyude wrote:
> Since we have to write ddb allocations at the same time as we do other
> plane updates, we're going to need to be able to control the order in
> which we execute modesets on each pipe. The easiest way to do this is to
> just factor this section of intel_atomic_commit_tail()
> (intel_atomic_commit() for stable branches) into it's own function, and
> add an appropriate display function hook for it.
>
> Based off of Matt Rope's suggestions
>
> Signed-off-by: Lyude <cpaul at redhat.com>
> [omitting CC for stable, since this patch will need to be changed for
> such backports first]
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter at intel.com>
> Cc: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Cc: Matt Roper <matthew.d.roper at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 +
> drivers/gpu/drm/i915/intel_display.c | 74
> +++++++++++++++++++++++++-----------
> 2 files changed, 54 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 87018d3..4964e3f 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -632,6 +632,8 @@ struct drm_i915_display_funcs {
> struct intel_crtc_state *crtc_state);
> void (*crtc_enable)(struct drm_crtc *crtc);
> void (*crtc_disable)(struct drm_crtc *crtc);
> + void (*update_crtcs)(struct drm_atomic_state *state,
> + unsigned int *crtc_vblank_mask);
> void (*audio_codec_enable)(struct drm_connector *connector,
> struct intel_encoder *encoder,
> const struct drm_display_mode
> *adjusted_mode);
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 79d146c..d985b5b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13624,6 +13624,52 @@ static bool needs_vblank_wait(struct
> intel_crtc_state *crtc_state)
> return false;
> }
>
> +static void intel_update_crtc(struct drm_crtc *crtc,
> + struct drm_atomic_state *state,
> + struct drm_crtc_state *old_crtc_state,
> + unsigned int *crtc_vblank_mask)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc->state);
> + bool modeset = needs_modeset(crtc->state);
> +
> + if (modeset) {
> + update_scanline_offset(intel_crtc);
> + dev_priv->display.crtc_enable(crtc);
> + } else {
> + intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
> + }
> +
> + if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
> + intel_fbc_enable(
> + intel_crtc, pipe_config,
> + to_intel_plane_state(crtc->primary->state));
> + }
> +
> + drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
> +
> + if (pipe_config->base.active && needs_vblank_wait(pipe_config))
You can drop the pipe_config->base.active since pipe_config->base.active
is just another way of writing crtc->state->active, which you tested
before calling this function.
Other than that,
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
> + *crtc_vblank_mask |= drm_crtc_mask(crtc);
> +}
> +
> +static void intel_update_crtcs(struct drm_atomic_state *state,
> + unsigned int *crtc_vblank_mask)
> +{
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *old_crtc_state;
> + int i;
> +
> + for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
> + if (!crtc->state->active)
> + continue;
> +
> + intel_update_crtc(crtc, state, old_crtc_state,
> + crtc_vblank_mask);
> + }
> +}
> +
> static void intel_atomic_commit_tail(struct drm_atomic_state *state)
> {
> struct drm_device *dev = state->dev;
> @@ -13715,17 +13761,9 @@ static void intel_atomic_commit_tail(struct
> drm_atomic_state *state)
> intel_modeset_verify_disabled(dev);
> }
>
> - /* Now enable the clocks, plane, pipe, and connectors that we set up. */
> + /* Complete the events for pipes that have now been disabled */
> for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> bool modeset = needs_modeset(crtc->state);
> - struct intel_crtc_state *pipe_config =
> - to_intel_crtc_state(crtc->state);
> -
> - if (modeset && crtc->state->active) {
> - update_scanline_offset(to_intel_crtc(crtc));
> - dev_priv->display.crtc_enable(crtc);
> - }
>
> /* Complete events for now disable pipes here. */
> if (modeset && !crtc->state->active && crtc->state->event) {
> @@ -13735,21 +13773,11 @@ static void intel_atomic_commit_tail(struct
> drm_atomic_state *state)
>
> crtc->state->event = NULL;
> }
> -
> - if (!modeset)
> -
> intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
> -
> - if (crtc->state->active &&
> - drm_atomic_get_existing_plane_state(state, crtc->primary))
> - intel_fbc_enable(intel_crtc, pipe_config,
> to_intel_plane_state(crtc->primary->state));
> -
> - if (crtc->state->active)
> - drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
> -
> - if (pipe_config->base.active && needs_vblank_wait(pipe_config))
> - crtc_vblank_mask |= 1 << i;
> }
>
> + /* Now enable the clocks, plane, pipe, and connectors that we set up. */
> + dev_priv->display.update_crtcs(state, &crtc_vblank_mask);
> +
> /* FIXME: We should call drm_atomic_helper_commit_hw_done() here
> * already, but still need the state for the delayed optimization. To
> * fix this:
> @@ -15202,6 +15230,8 @@ void intel_init_display_hooks(struct drm_i915_private
> *dev_priv)
> dev_priv->display.crtc_disable = i9xx_crtc_disable;
> }
>
> + dev_priv->display.update_crtcs = intel_update_crtcs;
> +
> /* Returns the core display clock speed */
> if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
> dev_priv->display.get_display_clock_speed =
> --
> 2.7.4
>
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
