[PATCH v1 1/2] drm/panel: simple-panel: add the delay timing for Sharp LQ123P1JX31

[Yakir Yang]

According to page 16 of Sharp LQ123P1JX31 datasheet, we need to add the
missing delay timing. Panel prepare time should be t1 (0.5ms~10ms) plus
t3 (0ms~100ms), and panel enable time should equal to t7 (0ms~50ms), and
panel unprepare time should be t11 (1ms~50ms) plus t12 (500ms~).

Signed-off-by: Yakir Yang <ykk at rock-chips.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c 
b/drivers/gpu/drm/panel/panel-simple.c
index 85143d1..f178998 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1384,6 +1384,11 @@ static const struct panel_desc sharp_lq123p1jx31 = {
                .width = 259,
                .height = 173,
        },
+       .delay = {
+               .prepare = 110,
+               .enable = 50,
+               .unprepare = 550,
+       },
 };

 static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
-- 
1.9.1