Thierry, David,
Can these patches be pulled in?
Do I need anything additional?
the Documentation bit has been Acked by Rob Herring.
On 06/01/2016 08:35 AM, Joshua Clayton wrote:
> Trivial patch to add Sharp LQ101K1LY04i to simple-panel
>
> Support the Sharp LQ101K1LY04i, a 10 inch WXGA (1280x800) lvds panel.
>
> Signed-off-by: Joshua Clayton <stillcompiling at gmail.com>
> ---
>
> This trivial addition and its documenatation patch was reviewed for 4.5;
> the only problems then were alphabetization.
>
> They slipped through the cracks and I haven't had the time to rebase and
> repost them until now. hopefully we can get these into 4.8?
>
> drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 3a7bdf1..c2d377c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1270,6 +1270,30 @@ static const struct panel_desc samsung_ltn140at29_301
> = {
> },
> };
>
> +static const struct display_timing sharp_lq101k1ly04_timing = {
> + .pixelclock = { 60000000, 65000000, 80000000 },
> + .hactive = { 1280, 1280, 1280 },
> + .hfront_porch = { 20, 20, 20 },
> + .hback_porch = { 20, 20, 20 },
> + .hsync_len = { 10, 10, 10 },
> + .vactive = { 800, 800, 800 },
> + .vfront_porch = { 4, 4, 4 },
> + .vback_porch = { 4, 4, 4 },
> + .vsync_len = { 4, 4, 4 },
> + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
> +};
> +
> +static const struct panel_desc sharp_lq101k1ly04 = {
> + .timings = &sharp_lq101k1ly04_timing,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 217,
> + .height = 136,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
> +};
> +
> static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
> .clock = 33300,
> .hdisplay = 800,
> @@ -1487,6 +1511,9 @@ static const struct of_device_id platform_of_match[] = {
> .compatible = "samsung,ltn140at29-301",
> .data = &samsung_ltn140at29_301,
> }, {
> + .compatible = "sharp,lq101k1ly04",
> + .data = &sharp_lq101k1ly04,
> + }, {
> .compatible = "shelly,sca07010-bfn-lnn",
> .data = &shelly_sca07010_bfn_lnn,
> }, {
