As observed on Apple iMac10,1, DCE-3.2, RV-730,
link rate of 2.7 Ghz is not selected, because
the args.v1.ucConfig flag setting for 2.7 Ghz
gets overwritten by a following assignment of
the transmitter to use.
Move link rate setup a few lines down to fix this.
In practice this didn't have any positive or
negative effect on display setup on the tested
iMac10,1 so i don't know if backporting to stable
makes sense or not.
Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>
---
drivers/gpu/drm/radeon/atombios_encoders.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c
b/drivers/gpu/drm/radeon/atombios_encoders.c
index a28377c..dc1e810 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -892,8 +892,6 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder,
int action, int panel_m
else
args.v1.ucLaneNum = 4;
- if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) &&
(dp_clock == 270000))
- args.v1.ucConfig |=
ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
args.v1.ucConfig =
ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
@@ -910,6 +908,10 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder,
int action, int panel_m
args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
else
args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) &&
(dp_clock == 270000))
+ args.v1.ucConfig |=
ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+
break;
case 2:
case 3:
--
2.7.0
