Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed,
clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to
follow the new binding.
Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
arch/arm/boot/dts/am335x-boneblack.dts | 71 ++++++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts
b/arch/arm/boot/dts/am335x-boneblack.dts
index 55c0e95..2bae4d1 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -9,6 +9,7 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+#include <dt-bindings/display/tda998x.h>
/ {
model = "TI AM335x BeagleBone Black";
@@ -64,6 +65,16 @@
AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
/* xdma_event_intr0 */
>;
};
+
+ mcasp0_pins: mcasp0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /*
mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /*
mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /*
mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a11.GPIO1_27 */
+ >;
+ };
};
&lcdc {
@@ -76,16 +87,22 @@
};
&i2c0 {
- tda19988 {
+ tda19988: tda19988 {
compatible = "nxp,tda998x";
reg = <0x70>;
+
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
- port {
- hdmi_0: endpoint at 0 {
- remote-endpoint = <&lcdc_0>;
+ #sound-dai-cells = <0>;
+ audio-ports = < AFMT_I2S 0x03>;
+
+ ports {
+ port at 0 {
+ hdmi_0: endpoint at 0 {
+ remote-endpoint = <&lcdc_0>;
+ };
};
};
};
@@ -94,3 +111,49 @@
&rtc {
system-power-controller;
};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+/ {
+ clk_mcasp0_fixed: clk_mcasp0_fixed {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ clk_mcasp0: clk_mcasp0 {
+ #clock-cells = <0>;
+ compatible = "gpio-gate-clock";
+ clocks = <&clk_mcasp0_fixed>;
+ enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on
GPIO1_27 */
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "TI BeagleBone Black";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ clocks = <&clk_mcasp0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+};
--
1.9.1
