[PATCH 5/5] arm/dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge

[Peter Senna Tschudin]

Configure the GE B850v3 to use the LVDS/DP++ bridge.

Signed-off-by: Peter Senna Tschudin <peter.senna at collabora.com>
---
 arch/arm/boot/dts/imx6q-b850v3.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts 
b/arch/arm/boot/dts/imx6q-b850v3.dts
index 88a70de..d366384 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -77,6 +77,13 @@
                fsl,data-mapping = "spwg";
                fsl,data-width = <24>;
                status = "okay";
+
+               port at 4 {
+                       reg = <4>;
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&b850v3_lvds_dp_bridge_in>;
+                       };
+               };
        };
 };

@@ -147,3 +154,27 @@
                reg = <0x4a>;
        };
 };
+
+&mux2_i2c2 {
+       status = "okay";
+       clock-frequency = <100000>;
+
+       b850v3_lvds_dp_bridge {
+               compatible = "ge,b850v3_lvds_dp";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg = <0x73>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+               edid-reg = <0x72>;
+
+               port at 0 {
+                       reg = <0>;
+                       b850v3_lvds_dp_bridge_in: endpoint {
+                               remote-endpoint = <&lvds0_out>;
+                       };
+               };
+       };
+};
-- 
2.5.5