[PATCH v2 1/5] ARM: memory: da8xx-ddrctl: new driver

[Sekhar Nori]

On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote:
> +static int da8xx_ddrctl_probe(struct platform_device *pdev)
> +{
> +     const struct da8xx_ddrctl_config_knob *knob;
> +     const struct da8xx_ddrctl_setting *setting;
> +     struct device_node *node;
> +     struct resource *res;
> +     void __iomem *ddrctl;
> +     struct device *dev;
> +     u32 reg;
> +
> +     dev = &pdev->dev;
> +     node = dev->of_node;
> +
> +     setting = da8xx_ddrctl_get_board_settings();
> +     if (!setting) {
> +             dev_err(dev, "no settings for board '%s'\n",
> +                     of_flat_dt_get_machine_name());
> +             return -EINVAL;
> +     }

This causes a section mismatch because of_flat_dt_get_machine_name() 
has an __init annotation. I did not notice that before, sorry.

It can be fixed with a patch like below:

---8<---
diff --git a/drivers/memory/da8xx-ddrctl.c b/drivers/memory/da8xx-ddrctl.c
index a20e7bbbcbe0..9ca5aab3ac54 100644
--- a/drivers/memory/da8xx-ddrctl.c
+++ b/drivers/memory/da8xx-ddrctl.c
@@ -102,6 +102,18 @@ static const struct da8xx_ddrctl_setting 
*da8xx_ddrctl_get_board_settings(void)
        return NULL;
 }

+static const char* da8xx_ddrctl_get_machine_name(void)
+{
+       const char *str;
+       int ret;
+
+       ret = of_property_read_string(of_root, "model", &str);
+       if (ret)
+               ret = of_property_read_string(of_root, "compatible", &str);
+
+       return str;
+}
+
 static int da8xx_ddrctl_probe(struct platform_device *pdev)
 {
        const struct da8xx_ddrctl_config_knob *knob;
@@ -118,7 +130,7 @@ static int da8xx_ddrctl_probe(struct platform_device *pdev)
        setting = da8xx_ddrctl_get_board_settings();
        if (!setting) {
                dev_err(dev, "no settings for board '%s'\n",
-                       of_flat_dt_get_machine_name());
+                       da8xx_ddrctl_get_machine_name());
                return -EINVAL;
        }
---8<--- 

A similar fix is required for the other driver in this series (patch 
2/5). I need some advise on whether I should introduce a common 
function to get the machine name post kernel boot-up (I cannot see an 
existing one). If yes, any advise on which file it should go into?

Thanks,
Sekhar