[PATCH v6 3/5] ARM: sun5i: a13-olinuxino: Enable VGA bridge

[Maxime Ripard]

Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 ++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts 
b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c65ea1..c69e0b0b7b55 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,47 @@
                        default-state = "on";
                };
        };
+
+       bridge {
+               compatible = "simple-vga-dac";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port at 0 {
+                               reg = <0>;
+
+                               vga_bridge_in: endpoint {
+                                       remote-endpoint = <&tcon0_out_vga>;
+                               };
+                       };
+
+                       port at 1 {
+                               reg = <1>;
+
+                               vga_bridge_out: endpoint {
+                                       remote-endpoint = <&vga_con_in>;
+                               };
+                       };
+               };
+       };
+
+       vga {
+               compatible = "vga-connector";
+
+               port {
+                       vga_con_in: endpoint {
+                               remote-endpoint = <&vga_bridge_out>;
+                       };
+               };
+       };
+};
+
+&be0 {
+       status = "okay";
 };

 &ehci0 {
@@ -211,6 +252,19 @@
        status = "okay";
 };

+&tcon0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&lcd_rgb666_pins>;
+       status = "okay";
+};
+
+&tcon0_out {
+       tcon0_out_vga: endpoint at 0 {
+               reg = <0>;
+               remote-endpoint = <&vga_bridge_in>;
+       };
+};
+
 &uart1 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart1_pins_b>;
-- 
git-series 0.8.10