On 10/20/2016 09:13 AM, Chen-Yu Tsai wrote:
> The Hummingbird A31 board has a RGB-to-VGA bridge which converts RGB
> output from the LCD interface to VGA signals.
>
> Enable this part of the display pipeline.

I couldn't find the enable-gpios binding for the bridge that you
introduced in the previous patch. Is that intentional?

Thanks,
Archit

>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 56 
> +++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts 
> b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> index 9a74637f677f..05a49b2147f1 100644
> --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> @@ -63,6 +63,49 @@
>               stdout-path = "serial0:115200n8";
>       };
>
> +     bridge {
> +             compatible = "dumb-vga-dac";
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port at 0 {
> +                             #address-cells = <1>;
> +                             #size-cells = <0>;
> +                             reg = <0>;
> +
> +                             vga_bridge_in: endpoint at 0 {
> +                                     reg = <0>;
> +                                     remote-endpoint = <&tcon0_out_vga>;
> +                             };
> +                     };
> +
> +                     port at 1 {
> +                             #address-cells = <1>;
> +                             #size-cells = <0>;
> +                             reg = <1>;
> +
> +                             vga_bridge_out: endpoint at 0 {
> +                                     reg = <0>;
> +                                     remote-endpoint = <&vga_con_in>;
> +                             };
> +                     };
> +             };
> +     };
> +
> +     vga {
> +             compatible = "vga-connector";
> +
> +             port {
> +                     vga_con_in: endpoint {
> +                             remote-endpoint = <&vga_bridge_out>;
> +                     };
> +             };
> +     };
> +
>       wifi_pwrseq: wifi_pwrseq {
>               compatible = "mmc-pwrseq-simple";
>               reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
> @@ -245,6 +288,19 @@
>       status = "okay";
>  };
>
> +&tcon0 {
> +     pinctrl-names = "default";
> +     pinctrl-0 = <&lcd0_rgb888_pins>;
> +     status = "okay";
> +};
> +
> +&tcon0_out {
> +     tcon0_out_vga: endpoint at 0 {
> +             reg = <0>;
> +             remote-endpoint = <&vga_bridge_in>;
> +     };
> +};
> +
>  &uart0 {
>       pinctrl-names = "default";
>       pinctrl-0 = <&uart0_pins_a>;
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Reply via email to