Hi Yannick,
Thank you for the patch.
On Monday 16 Jan 2017 14:28:58 Yannick Fertre wrote:
> Signed-off-by: Yannick Fertre <yannick.fer...@st.com>
> ---
> .../devicetree/bindings/display/st,ltdc.txt | 57 ++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/st,ltdc.txt
>
> diff --git a/Documentation/devicetree/bindings/display/st,ltdc.txt
> b/Documentation/devicetree/bindings/display/st,ltdc.txt new file mode
> 100644
> index 0000000..20e89da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/st,ltdc.txt
> @@ -0,0 +1,57 @@
> +* STMicroelectronics STM32 lcd-tft display controller
> +
> +- st-display-subsystem: Master device for DRM sub-components
> + This device must be the parent of all the sub-components and is
> responsible
> + of bind them.
Why do you need this ? At a quick glance the ltdc node should be enough.
> + Required properties:
> + - compatible: "st,display-subsystem"
> + - ranges: to allow probing of subdevices
> +
> +- ltdc_host: lcd-tft display controller host
> + must be a sub-node of st-display-subsystem
> + Required properties:
> + - compatible: "st,ltdc"
> + - reg: Physical base address of the IP registers and length of memory
> mapped region.
> + - clocks: from common clock binding: handle hardware IP needed clocks,
> the
> + number of clocks may depend of the SoC type.
> + See ../clocks/clock-bindings.txt for details.
> + - clock-names: names of the clocks listed in clocks property in the same
> + order.
You need to define the required/optional clocks with their names here. If they
vary depending on the SoC, the DT bindings document need to list them for each
SoC.
> + - resets: resets to be used by the device
> + See ../reset/reset.txt for details.
> + - reset-names: names of the resets listed in resets property in the same
> + order.
> + Required nodes:
> + - Video port for RGB output.
> +
> +Example:
> +
> +/ {
> + ...
> + soc {
> + ...
> + st-display-subsystem {
> + compatible = "st,display-subsystem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + dma-ranges;
> +
> + ltdc_host: stm32-ltdc@40016800 {
> + compatible = "st,ltdc";
> + reg = <0x40016800 0x200>;
> + interrupts = <88>, <89>;
> + resets = <&rcc 314>;
> + clocks = <&rcc 1 8>;
> + clock-names = "clk-lcd";
> + status = "disabled";
> +
> + port {
> + ltdc_out_rgb: endpoint {
> + };
> + };
> + };
> + };
> + ...
> + };
> +};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
