Reviewed-by: Chris Zhong <z...@rock-chips.com>
On 01/22/2017 12:31 AM, John Keeping wrote:
Use the same calculation as the vendor kernel to derive the escape clock
speed.
Signed-off-by: John Keeping <j...@metanate.com>
---
Unchanged in v2
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 290282e86d16..c2e0ba96e0a0 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -710,11 +710,13 @@ static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
{
+ u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
dsi_write(dsi, DSI_PWR_UP, RESET);
dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
| PHY_RSTZ | PHY_SHUTDOWNZ);
dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
- TX_ESC_CLK_DIVIDSION(7));
+ TX_ESC_CLK_DIVIDSION(esc_clk_division));
}
static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
