On Fri, Apr 21, 2017 at 07:19:48PM +0200, Sylwester Nawrocki wrote:
> The hdmi-codec interface added in this patch is required to properly
> support HDMI audio. Currently the audio part of the SoC internal
> HDMI transmitter is configured with fixed values, which makes HDMI
> audio working by chance, only on boards equipped with external audio
> codec connected in parallel with the HDMI audio transmitter I2S input
> interface.
>
> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> ---
> drivers/gpu/drm/exynos/Kconfig | 1 +
> drivers/gpu/drm/exynos/exynos_hdmi.c | 220
> +++++++++++++++++++++++++++++------
> 2 files changed, 188 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
> index 1d18534..a6edbb6 100644
> --- a/drivers/gpu/drm/exynos/Kconfig
> +++ b/drivers/gpu/drm/exynos/Kconfig
> @@ -3,6 +3,7 @@ config DRM_EXYNOS
> depends on OF && DRM && (ARCH_S3C64XX || ARCH_EXYNOS ||
> ARCH_MULTIPLATFORM)
> select DRM_KMS_HELPER
> select VIDEOMODE_HELPERS
> + select SND_SOC_HDMI_CODEC if SND_SOC
> help
> Choose this option if you have a Samsung SoC EXYNOS chipset.
> If M is selected the module will be called exynosdrm.
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c
> b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index 88ccc04..be18023 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -40,7 +40,7 @@
> #include <linux/component.h>
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> -
> +#include <sound/hdmi-codec.h>
> #include <drm/exynos_drm.h>
>
> #include "exynos_drm_drv.h"
> @@ -110,13 +110,23 @@ struct hdmi_driver_data {
> struct string_array_spec clk_muxes;
> };
>
> +struct hdmi_audio {
> + struct platform_device *pdev;
> + struct hdmi_audio_infoframe infoframe;
> + unsigned int sample_rate;
> + unsigned int sample_width;
> + u8 enable;
> +};
> +
> struct hdmi_context {
> struct drm_encoder encoder;
> struct device *dev;
> struct drm_device *drm_dev;
> struct drm_connector connector;
> + struct hdmi_audio audio;
> bool powered;
> bool dvi_mode;
> + struct mutex mutex;
I find short documentation what is protected by mutex usually quite
useful. Can you add such?
> struct delayed_work hotplug_work;
> struct drm_display_mode current_mode;
> const struct hdmi_driver_data *drv_data;
> @@ -766,6 +776,22 @@ static int hdmi_clk_set_parents(struct hdmi_context
> *hdata, bool to_phy)
> return ret;
> }
>
> +static int hdmi_audio_infoframe_apply(struct hdmi_context *hdata)
> +{
> + struct hdmi_audio_infoframe *infoframe = &hdata->audio.infoframe;
> + u8 buf[HDMI_INFOFRAME_SIZE(AUDIO)];
> + int len;
> +
> + len = hdmi_audio_infoframe_pack(infoframe, buf, sizeof(buf));
> + if (len < 0)
> + return len;
> +
> + hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_EVERY_VSYNC);
> + hdmi_reg_write_buf(hdata, HDMI_AUI_HEADER0, buf, len);
> +
> + return 0;
> +}
> +
> static void hdmi_reg_infoframes(struct hdmi_context *hdata)
> {
> union hdmi_infoframe frm;
> @@ -803,15 +829,7 @@ static void hdmi_reg_infoframes(struct hdmi_context
> *hdata)
> hdmi_reg_write_buf(hdata, HDMI_VSI_DATA(0), buf + 3, ret - 3);
> }
>
> - ret = hdmi_audio_infoframe_init(&frm.audio);
> - if (!ret) {
> - frm.audio.channels = 2;
> - ret = hdmi_audio_infoframe_pack(&frm.audio, buf, sizeof(buf));
> - }
> - if (ret > 0) {
> - hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_EVERY_VSYNC);
> - hdmi_reg_write_buf(hdata, HDMI_AUI_HEADER0, buf, ret);
> - }
> + hdmi_audio_infoframe_apply(hdata);
> }
>
> static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
> @@ -993,23 +1011,18 @@ static void hdmi_reg_acr(struct hdmi_context *hdata,
> u32 freq)
> hdmi_reg_writeb(hdata, HDMI_ACR_CON, 4);
> }
>
> -static void hdmi_audio_init(struct hdmi_context *hdata)
> +static void hdmi_audio_config(struct hdmi_context *hdata)
> {
> - u32 sample_rate, bits_per_sample;
> - u32 data_num, bit_ch, sample_frq;
> - u32 val;
> + u32 data_num, sample_freq, val;
> + u32 bit_ch = 1;
>
> - sample_rate = 44100;
> - bits_per_sample = 16;
>
> - switch (bits_per_sample) {
> + switch (hdata->audio.sample_width) {
> case 20:
> data_num = 2;
> - bit_ch = 1;
> break;
> case 24:
> data_num = 3;
> - bit_ch = 1;
> break;
> default:
> data_num = 1;
> @@ -1017,7 +1030,7 @@ static void hdmi_audio_init(struct hdmi_context *hdata)
> break;
> }
>
> - hdmi_reg_acr(hdata, sample_rate);
> + hdmi_reg_acr(hdata, hdata->audio.sample_rate);
>
> hdmi_reg_writeb(hdata, HDMI_I2S_MUX_CON, HDMI_I2S_IN_DISABLE
> | HDMI_I2S_AUD_I2S | HDMI_I2S_CUV_I2S_ENABLE
> @@ -1028,10 +1041,21 @@ static void hdmi_audio_init(struct hdmi_context
> *hdata)
>
> hdmi_reg_writeb(hdata, HDMI_I2S_MUX_CUV, HDMI_I2S_CUV_RL_EN);
>
> - sample_frq = (sample_rate == 44100) ? 0 :
> - (sample_rate == 48000) ? 2 :
> - (sample_rate == 32000) ? 3 :
> - (sample_rate == 96000) ? 0xa : 0x0;
> + switch(hdata->audio.sample_rate) {
> + case 32000:
> + sample_freq = 0x3;
> + break;
> + case 48000:
> + sample_freq = 0x2;
> + break;
> + case 96000:
> + sample_freq = 0xa;
> + break;
> + case 44100:
> + default:
> + sample_freq = 0;
> + break;
> + }
>
> hdmi_reg_writeb(hdata, HDMI_I2S_CLK_CON, HDMI_I2S_CLK_DIS);
> hdmi_reg_writeb(hdata, HDMI_I2S_CLK_CON, HDMI_I2S_CLK_EN);
> @@ -1065,7 +1089,7 @@ static void hdmi_audio_init(struct hdmi_context *hdata)
> hdmi_reg_writeb(hdata, HDMI_I2S_CH_ST_1, HDMI_I2S_CD_PLAYER);
> hdmi_reg_writeb(hdata, HDMI_I2S_CH_ST_2, HDMI_I2S_SET_SOURCE_NUM(0));
> hdmi_reg_writeb(hdata, HDMI_I2S_CH_ST_3, HDMI_I2S_CLK_ACCUR_LEVEL_2
> - | HDMI_I2S_SET_SMP_FREQ(sample_frq));
> + | HDMI_I2S_SET_SMP_FREQ(sample_freq));
> hdmi_reg_writeb(hdata, HDMI_I2S_CH_ST_4,
> HDMI_I2S_ORG_SMP_FREQ_44_1
> | HDMI_I2S_WORD_LEN_MAX24_24BITS
> @@ -1074,13 +1098,15 @@ static void hdmi_audio_init(struct hdmi_context
> *hdata)
> hdmi_reg_writeb(hdata, HDMI_I2S_CH_ST_CON, HDMI_I2S_CH_STATUS_RELOAD);
> }
>
> -static void hdmi_audio_control(struct hdmi_context *hdata, bool onoff)
> +static void hdmi_audio_control(struct hdmi_context *hdata)
> {
> + bool enable = hdata->audio.enable;
> +
> if (hdata->dvi_mode)
> return;
>
> - hdmi_reg_writeb(hdata, HDMI_AUI_CON, onoff ? 2 : 0);
> - hdmi_reg_writemask(hdata, HDMI_CON_0, onoff ?
> + hdmi_reg_writeb(hdata, HDMI_AUI_CON, enable ? 2 : 0);
> + hdmi_reg_writemask(hdata, HDMI_CON_0, enable ?
> HDMI_ASP_EN : HDMI_ASP_DIS, HDMI_ASP_MASK);
> }
>
> @@ -1400,9 +1426,9 @@ static void hdmi_conf_apply(struct hdmi_context *hdata)
> {
> hdmi_start(hdata, false);
> hdmi_conf_init(hdata);
> - hdmi_audio_init(hdata);
> + hdmi_audio_config(hdata);
> hdmi_mode_apply(hdata);
> - hdmi_audio_control(hdata, true);
> + hdmi_audio_control(hdata);
> }
>
> static void hdmi_mode_set(struct drm_encoder *encoder,
> @@ -1476,8 +1502,12 @@ static void hdmi_enable(struct drm_encoder *encoder)
> {
> struct hdmi_context *hdata = encoder_to_hdmi(encoder);
>
> + mutex_lock(&hdata->mutex);
> +
> hdmiphy_enable(hdata);
> hdmi_conf_apply(hdata);
> +
> + mutex_unlock(&hdata->mutex);
> }
>
> static void hdmi_disable(struct drm_encoder *encoder)
> @@ -1486,6 +1516,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
> struct drm_crtc *crtc = encoder->crtc;
> const struct drm_crtc_helper_funcs *funcs = NULL;
>
> + mutex_lock(&hdata->mutex);
> +
> if (!hdata->powered)
Need to unlock mutex (here and maybe in other exit paths?).
Best regards,
Krzysztof
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
