This patch adds documentation of device tree bindings for the STM32
DSI host driver based on the Synopsys DW MIPI DSI bridge driver.
Signed-off-by: Philippe CORNU <philippe.co...@st.com>
Reviewed-by: Neil Armstrong <narmstr...@baylibre.com>
---
.../devicetree/bindings/display/st,stm32-ltdc.txt | 104 ++++++++++++++++++++-
1 file changed, 103 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 90a8459..6353d79 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -12,8 +12,40 @@
Required nodes:
- Video port for RGB output.
-Example:
+* STMicroelectronics STM32 DSI specific extensions to Synopsys DesignWare MIPI
+ DSI host controller
+The STMicroelectronics STM32 DSI driver uses the Synopsys DesignWare MIPI
+DSI host controller driver. For all mandatory properties & nodes, please refer
+to the related documentation in [5].
+
+Mandatory properties specific to STM32 DSI:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "st,stm32-dsi".
+- clock-names:
+ - phy pll reference clock string name, must be "ref".
+- resets: see [5].
+- reset-names: see [5].
+
+Mandatory nodes specific to STM32 DSI:
+- ports: A node containing DSI input & output port nodes with endpoint
+ definitions as documented in [3] & [4].
+ - port@0: DSI input port node, connected to the ltdc rgb output port.
+ - port@1: DSI output port node, connected to a panel or a bridge input port.
+- panel or bridge node: A node containing the panel or bridge description as
+ documented in [6].
+ - port: panel or bridge port node, connected to the DSI output port (port@1).
+
+Note: You can find more documentation in the following references
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
+[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+
+Example 1: RGB panel
/ {
...
soc {
@@ -33,3 +65,73 @@ Example:
};
};
};
+
+Example 2: DSI panel
+
+/ {
+ ...
+ soc {
+ ...
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x40016800 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+ clocks = <&rcc 1 CLK_LCD>;
+ clock-names = "lcd";
+
+ port {
+ ltdc_out_dsi: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
+
+
+ dsi: dsi@40016c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-dsi";
+ reg = <0x40016c00 0x800>;
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+ clock-names = "ref", "pclk";
+ resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+ reset-names = "apb";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint =
<<dc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint =
<&dsi_in_panel>;
+ };
+ };
+
+ };
+
+ panel-dsi@0 {
+ reg = <0>; /* dsi virtual channel (0..3) */
+ compatible = ...;
+ enable-gpios = ...;
+
+ port {
+ dsi_in_panel: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ };
+
+ };
+
+ };
+};
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
