When we are enabling a CRTC, drm_crtc_vblank_get() is called before
drm_crtc_vblank_on(), which is not supposed to happen (hence the
WARN_ON() in the code). To solve the problem, we delay the 'update
display list' operation after the CRTC is actually enabled.
Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 66 +++++++++++++++++++++++++++---------------
1 file changed, 43 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index f20c01759c0d..3803d498bf59 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -533,6 +533,34 @@ static void vc4_crtc_disable(struct drm_crtc *crtc)
}
}
+static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+
+ if (crtc->state->event) {
+ unsigned long flags;
+
+ crtc->state->event->pipe = drm_crtc_index(crtc);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ vc4_crtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ } else {
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+ }
+}
+
static void vc4_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -543,6 +571,12 @@ static void vc4_crtc_enable(struct drm_crtc *crtc)
require_hvs_enabled(dev);
+ /* Enable vblank irq handling before crtc is started otherwise
+ * drm_crtc_get_vblank() fails in vc4_crtc_update_dlist().
+ */
+ drm_crtc_vblank_on(crtc);
+ vc4_crtc_update_dlist(crtc);
+
/* Turn on the scaler, which will wait for vstart to start
* compositing.
*/
@@ -554,9 +588,6 @@ static void vc4_crtc_enable(struct drm_crtc *crtc)
/* Turn on the pixel valve, which will emit the vstart signal. */
CRTC_WRITE(PV_V_CONTROL,
CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
-
- /* Enable vblank irq handling after crtc is started. */
- drm_crtc_vblank_on(crtc);
}
static enum drm_mode_status vc4_crtc_mode_valid(struct drm_crtc *crtc,
@@ -610,7 +641,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
struct drm_plane *plane;
bool debug_dump_regs = false;
@@ -632,25 +662,15 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size);
- if (crtc->state->event) {
- unsigned long flags;
-
- crtc->state->event->pipe = drm_crtc_index(crtc);
-
- WARN_ON(drm_crtc_vblank_get(crtc) != 0);
-
- spin_lock_irqsave(&dev->event_lock, flags);
- vc4_crtc->event = crtc->state->event;
- crtc->state->event = NULL;
-
- HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- vc4_state->mm.start);
-
- spin_unlock_irqrestore(&dev->event_lock, flags);
- } else {
- HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- vc4_state->mm.start);
- }
+ /* Only update DISPLIST if the CRTC was already running and is not
+ * being disabled.
+ * vc4_crtc_enable() takes care of updating the dlist just after
+ * re-enabling VBLANK interrupts and before enabling the engine.
+ * If the CRTC is being disabled, there's no point in updating this
+ * information.
+ */
+ if (crtc->state->active && old_state->active)
+ vc4_crtc_update_dlist(crtc);
if (debug_dump_regs) {
DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
