On Fri, Jul 14, 2017 at 12:14:37PM +0800, Chen-Yu Tsai wrote:
> On Thu, Jul 13, 2017 at 10:13 PM, Maxime Ripard
> <maxime.rip...@free-electrons.com> wrote:
> > It seems like the dotclock dividers are a bit less strict range, and can
> > operate even with a smaller than 6 divider. Loose the boundaries a bit.
> >
> > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
> > ---
> > drivers/gpu/drm/sun4i/sun4i_dotclock.c | 20 +++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
> > b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
> > index d401156490f3..0b844c0dd102 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
> > @@ -77,7 +77,25 @@ static long sun4i_dclk_round_rate(struct clk_hw *hw,
> > unsigned long rate,
> > u8 best_div = 1;
> > int i;
> >
> > - for (i = 6; i <= 127; i++) {
> > + /*
> > + * There's something odd here.
> > + *
> > + * In the A13 user manual, this is stated to be >= 6 when
> > + * dclk1 and dclk2 are used (without any hint on how to use
> > + * them), and >= 4 when only dclk is used.
>
> You set it in TCON0_IO_POL_REG, which sets the clock phase delay.oh, so it's d for delay? I assumed it was for dotclock. > I think we were setting this before, but you removed it as part of > the previous TCON clean up patches? Hmmm, I might have.. :) > In the A33, there are even more options, like DCLK / 2 (with 0 or 90 > degree phase delay). Where did you find this documentation? I was under the impression that all that DCLK stuff was in the higher bits of the DCLK register, but apparently there's more to it. > > + * > > + * In the A33 user manual, when only dclk is used, it is set > > + * to be >= 6 in the former case, and >= 1 in the > > + * latter. There's also some (obscure) explanations about the > > + * dclk1 and dclk2 vs dclk that seems to be in the upper 4 > > + * bits. What those clocks are and what bit does what is not > > + * really clear. > > Looks like mux bits to me. How they differ from TCON0_IO_POL_REG is > beyond me ATM. It might be some additional dividers too. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
