Am Dienstag, 29. August 2017, 18:17:11 CEST schrieb Mark yao:
> On 2017年08月23日 14:26, Sandy Huang wrote:
> > This patch add Document for Rockchip Soc RK3288 LVDS,
> > This based on the patches from Mark yao and Heiko Stuebner.
> >
> > Signed-off-by: Sandy Huang <[email protected]>
> > Signed-off-by: Mark yao <[email protected]>
> > Signed-off-by: Heiko Stuebner <[email protected]>
> > ---
> Looks good for me:
>
> Reviewed-by: Mark Yao <[email protected]>
Signed-off ordering is wrong though ... you add a Signed-off below
all others and you could also drop the one from me, as I don't
think I did provide to much value between Mark's and Sandy's variant
of the patches :-)
Heiko
> > Changes according to Rob Herring's review.
> >
> > .../bindings/display/rockchip/rockchip-lvds.txt | 99
> > ++++++++++++++++++++++
> > 1 file changed, 99 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> > b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> > new file mode 100644
> > index 0000000..da6939e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> > @@ -0,0 +1,99 @@
> > +Rockchip RK3288 LVDS interface
> > +================================
> > +
> > +Required properties:
> > +- compatible: matching the soc type, one of
> > + - "rockchip,rk3288-lvds";
> > +
> > +- reg: physical base address of the controller and length
> > + of memory mapped region.
> > +- clocks: must include clock specifiers corresponding to entries in the
> > + clock-names property.
> > +- clock-names: must contain "pclk_lvds"
> > +
> > +- avdd1v0-supply: regulator phandle for 1.0V analog power
> > +- avdd1v8-supply: regulator phandle for 1.8V analog power
> > +- avdd3v3-supply: regulator phandle for 3.3V analog power
> > +
> > +- rockchip,grf: phandle to the general register files syscon
> > +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output
> > interface
> > +
> > +Optional properties:
> > +- pinctrl-names: must contain a "lcdc" entry.
> > +- pinctrl-0: pin control group to be used for this controller.
> > +
> > +Required nodes:
> > +
> > +The lvds has two video ports as described by
> > + Documentation/devicetree/bindings/media/video-interfaces.txt
> > +Their connections are modeled using the OF graph bindings specified in
> > + Documentation/devicetree/bindings/graph.txt.
> > +
> > +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
> > +- video port 1 for either a panel or subsequent encoder
> > +
> > +the lvds panel described by
> > + Documentation/devicetree/bindings/display/panel/simple-panel.txt
> > +
> > +Panel required properties:
> > +- ports for remote LVDS output
> > +
> > +Panel optional properties:
> > +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
> > +This describes decribed by:
> > + Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> > +
> > +Example:
> > +
> > +lvds_panel: lvds-panel {
> > + compatible = "auo,b101ean01";
> > + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> > + data-mapping = "jeida-24";
> > +
> > + ports {
> > + panel_in_lvds: endpoint {
> > + remote-endpoint = <&lvds_out_panel>;
> > + };
> > + };
> > +};
> > +
> > +For Rockchip RK3288:
> > +
> > + lvds: lvds@ff96c000 {
> > + compatible = "rockchip,rk3288-lvds";
> > + rockchip,grf = <&grf>;
> > + reg = <0xff96c000 0x4000>;
> > + clocks = <&cru PCLK_LVDS_PHY>;
> > + clock-names = "pclk_lvds";
> > + pinctrl-names = "lcdc";
> > + pinctrl-0 = <&lcdc_ctl>;
> > + avdd1v0-supply = <&vdd10_lcd>;
> > + avdd1v8-supply = <&vcc18_lcd>;
> > + avdd3v3-supply = <&vcca_33>;
> > + rockchip,output = "rgb";
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + lvds_in: port@0 {
> > + reg = <0>;
> > +
> > + lvds_in_vopb: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&vopb_out_lvds>;
> > + };
> > + lvds_in_vopl: endpoint@1 {
> > + reg = <1>;
> > + remote-endpoint = <&vopl_out_lvds>;
> > + };
> > + };
> > +
> > + lvds_out: port@1 {
> > + reg = <1>;
> > +
> > + lvds_out_panel: endpoint {
> > + remote-endpoint = <&panel_in_lvds>;
> > + };
> > + };
> > + };
> > + };
>
>
>
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
