Hi Maciej, On Tuesday, 5 September 2017 16:01:54 EEST Maciej Purski wrote: > Hi Laurent, > > Thank you for your reply. The problem was already discussed when adding > sil8620 driver. It can be solved later. I'm CC-ing Andrzej Hajda, as he > used to discuss it with you.
I'm afraid it can't be solved later. DT bindings are supposed to be a stable ABI, we can't merge a binding that we already know isn't correct. > https://patchwork.freedesktop.org/patch/114224/ > https://lists.freedesktop.org/archives/dri-devel/2015-December/096756.html > > Regards, > > Maciej > > On 31/08/17 15:30, Laurent Pinchart wrote: > > Hi Maciej, > > > > Thank you for the patch. > > > > On Thursday, 31 August 2017 15:27:13 EEST Maciej Purski wrote: > >> SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0. > >> It is controlled via I2C bus. Its interaction with other > >> devices in video pipeline is performed mainly on HW level. > >> The only interaction it does on device driver level is > >> filtering-out unsupported video modes, it exposes drm_bridge > >> interface to perform this operation. > >> > >> This patch is based on the code refactored by Tomasz Stanislawski > >> <t.stanisl...@samsung.com>, which was initially developed by: > >> Adam Hampson <ahamp...@sta.samsung.com> > >> Erik Gilling <konk...@android.com> > >> Shankar Bandal <shanka...@samsung.com> > >> Dharam Kumar <dharam...@samsung.com> > >> > >> Signed-off-by: Maciej Purski <m.pur...@samsung.com> > >> --- > >> Changes in v2: > >> - use bulk_requlators instead of single one > >> - substitute some of the magic values with macros > >> - improve coding style > >> - improved error handling in sii9234_probe() > >> --- > >> > >> .../devicetree/bindings/display/bridge/sii9234.txt | 34 + > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/sii9234.c | 993 > >> ++++++++++++++++++ > >> 4 files changed, 1036 insertions(+) > >> create mode 100644 > >> > >> Documentation/devicetree/bindings/display/bridge/sii9234.txt create mode > >> 100644 drivers/gpu/drm/bridge/sii9234.c > >> > >> diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt > >> b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file > >> mode 100644 > >> index 0000000..3ce7413 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt > >> @@ -0,0 +1,34 @@ > >> +Silicon Image SiI9234 HDMI/MHL bridge bindings > >> + > >> +Required properties: > >> + - compatible : "sil,sii9234". > >> + - reg : I2C address for TPI interface, use 0x39 > >> + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) > >> + - iovcc18-supply : I/O Supply Voltage (1.8V) > >> + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) > >> + - cvcc12-supply : Digital Core Supply Voltage (1.2V) > >> + - interrupts, interrupt-parent: interrupt specifier of INT pin > >> + - reset-gpios: gpio specifier of RESET pin (active low) > >> + - video interfaces: Device node can contain video interface port > >> + node for HDMI encoder according to [1]. > >> + > >> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt > > > > Doesn't this chip have two ports, one input connected to the SoC and one > > output connected to an HDMI connector ? If so there should be two ports in > > DT too. > > > >> +Example: > >> + sii9234@39 { > >> + compatible = "sil,sii9234"; > >> + reg = <0x39>; > >> + avcc33-supply = <&vcc33mhl>; > >> + iovcc18-supply = <&vcc18mhl>; > >> + avcc12-supply = <&vsil12>; > >> + cvcc12-supply = <&vsil12>; > >> + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; > >> + interrupt-parent = <&gpf3>; > >> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; > >> + > >> + port { > >> + mhl_to_hdmi: endpoint { > >> + remote-endpoint = <&hdmi_to_mhl>; > > > > It would be useful to include the remote DT nodes in the example too. > > > >> + }; > >> + }; > >> + }; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
