Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.
Signed-off-by: Meghana Madhyastha <meghana.madhyas...@gmail.com>
---
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index e065f7e10..0803f64cb 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -88,10 +88,8 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
- if (ddata->backlight) {
- ddata->backlight->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(ddata->backlight);
- }
+ if (ddata->backlight)
+ backlight_enable(ddata->backlight);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
@@ -106,10 +104,8 @@ static void panel_dpi_disable(struct omap_dss_device
*dssdev)
if (!omapdss_device_is_enabled(dssdev))
return;
- if (ddata->backlight) {
- ddata->backlight->props.power = FB_BLANK_POWERDOWN;
- backlight_update_status(ddata->backlight);
- }
+ if (ddata->backlight)
+ backlight_disable(ddata->backlight);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
regulator_disable(ddata->vcc_supply);
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
