Hi Heiko, On Monday, 19 February 2018 20:46:46 EET Heiko Stuebner wrote: > Am Montag, 19. Februar 2018, 17:59:02 CET schrieb Laurent Pinchart: > > On Friday, 16 February 2018 22:41:53 EET Heiko Stuebner wrote: > >> In some IP implementations the reading of the phy-type may be broken. > >> One example are the Rockchip rk3228 and rk3328 socs that use a separate > >> phy from Innosilicon but still report the HDMI20_TX type. > >> > >> So allow the glue driver to force a specific type, like the vendor-phy > >> for these cases. > >> > >> Signed-off-by: Heiko Stuebner <he...@sntech.de> > > > > Tested-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > > thanks for testing :-) > > >> --- > >> > >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 +++- > >> include/drm/bridge/dw_hdmi.h | 1 + > >> 2 files changed, 4 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index > >> f9802399cc0d..50d231626c4d 100644 > >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > >> @@ -2218,7 +2218,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi > >> *hdmi) > >> unsigned int i; > >> u8 phy_type; > >> > >> - phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID); > >> + phy_type = (hdmi->plat_data->phy_force_type) ? > >> + hdmi->plat_data->phy_force_type : > >> + hdmi_readb(hdmi, HDMI_CONFIG2_ID); > > > > No need for parentheses. You could even write this > > > > phy_type = hdmi->plat_data->phy_force_type ? > > : hdmi_readb(hdmi, HDMI_CONFIG2_ID); > > > > but that's up to you. > > > > What if a driver wants to force the PHY type to > > DW_HDMI_PHY_DWC_HDMI_TX_PHY ? Or do you expect only the > > DW_HDMI_PHY_VENDOR_PHY type to be forced ? If so, we could also use a > > force_vendor_phy boolean field instead of phy_force_type. > > Initially I thought of implicitly overriding the phy-type when the external > phy-ops are set, but decided against it because that might break > (theoretical) cases where phy-ops may be always set but only used when > the ip returns a matching phy-type and thus came to just allow overriding > that type reading. > > As for limiting to only allow forcing the vendor type, my personal feeling > would be to allow glue drivers to just override the type as needed > like done in the patch. As can be seen on the rk3328, the dw-hdmi > reports one of the regular phys (forgot which one) but instead has a > completely separate ip for it, so I'd guess we may very well see > implementations that just report a wrong type (no vendor-type). > > So I don't see an issue with drivers being allowed to set the type to > DW_HDMI_PHY_DWC_HDMI_TX_PHY, because such cases may exist in the > future and I'd expect driver authors to somewhat know what they're doing.
My point was that DW_HDMI_PHY_DWC_HDMI_TX_PHY == 0, so trying to force DW_HDMI_PHY_DWC_HDMI_TX_PHY through phy_force_type won't work. > But I'm not tied to that, so will go with the majority opinion :-D . -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list email@example.com https://lists.freedesktop.org/mailman/listinfo/dri-devel