From: Maxime Ripard <maxime.rip...@free-electrons.com>
Both TCON clocks are very sensitive to clock changes, since any change
might lead to improper timings.
Make sure our rate is never changed.
Tested-by: Giulio Benetti <giulio.bene...@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index b73acab74867..cbe87cee13d1 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -261,7 +261,7 @@ static void sun4i_tcon0_mode_set_common(struct
sun4i_tcon *tcon,
const struct drm_display_mode *mode)
{
/* Configure the dot clock */
- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+ clk_set_rate_exclusive(tcon->dclk, mode->crtc_clock * 1000);
/* Set the resolution */
regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
@@ -419,7 +419,7 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon
*tcon,
WARN_ON(!tcon->quirks->has_channel_1);
/* Configure the dot clock */
- clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
+ clk_set_rate_exclusive(tcon->sclk1, mode->crtc_clock * 1000);
/* Adjust clock delay */
clk_delay = sun4i_tcon_get_clk_delay(mode, 1);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
