Replace  macro debug by pr_error, pr_warn or pr_info.

Signed-off-by: yannick fertre <yannick.fer...@st.com>
---
 drivers/video/stm32/stm32_ltdc.c | 62 ++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
index bd9c0de..e95f35c 100644
--- a/drivers/video/stm32/stm32_ltdc.c
+++ b/drivers/video/stm32/stm32_ltdc.c
@@ -176,13 +176,13 @@ static u32 stm32_ltdc_get_pixel_format(enum 
video_log2_bpp l2bpp)
        case VIDEO_BPP2:
        case VIDEO_BPP4:
        default:
-               debug("%s: warning %dbpp not supported yet, %dbpp instead\n",
-                     __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
+               pr_warn("%s: warning %dbpp not supported yet, %dbpp instead\n",
+                       __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
                pf = PF_RGB565;
                break;
        }
 
-       debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
+       pr_info("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
 
        return (u32)pf;
 }
@@ -249,7 +249,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv 
*priv,
 
        /* Signal polarities */
        val = 0;
-       debug("%s: timing->flags 0x%08x\n", __func__, timings->flags);
+       pr_info("%s: timing->flags 0x%08x\n", __func__, timings->flags);
        if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH)
                val |= GCR_HSPOL;
        if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
@@ -343,26 +343,26 @@ static int stm32_ltdc_probe(struct udevice *dev)
 
        priv->regs = (void *)dev_read_addr(dev);
        if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
-               debug("%s: ltdc dt register address error\n", __func__);
+               pr_err("%s: ltdc dt register address error\n", __func__);
                return -EINVAL;
        }
 
        ret = clk_get_by_index(dev, 0, &pclk);
        if (ret) {
-               debug("%s: peripheral clock get error %d\n", __func__, ret);
+               pr_err("%s: peripheral clock get error %d\n", __func__, ret);
                return ret;
        }
 
        ret = clk_enable(&pclk);
        if (ret) {
-               debug("%s: peripheral clock enable error %d\n",
-                     __func__, ret);
+               pr_err("%s: peripheral clock enable error %d\n",
+                      __func__, ret);
                return ret;
        }
 
        ret = reset_get_by_index(dev, 0, &rst);
        if (ret) {
-               debug("%s: missing ltdc hardware reset\n", __func__);
+               pr_err("%s: missing ltdc hardware reset\n", __func__);
                return -ENODEV;
        }
 
@@ -372,41 +372,40 @@ static int stm32_ltdc_probe(struct udevice *dev)
 #ifdef CONFIG_VIDEO_BRIDGE
        ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
        if (ret) {
-               debug("%s: No video bridge, or no backlight on bridge\n",
-                     __func__);
+               pr_info("%s: No video bridge, or no backlight on bridge\n",
+                       __func__);
        }
 
        if (bridge) {
                ret = video_bridge_attach(bridge);
                if (ret) {
-                       debug("%s: fail to attach bridge\n", __func__);
+                       pr_err("%s: fail to attach bridge\n", __func__);
                        return ret;
                }
        }
 #endif
        ret = uclass_first_device(UCLASS_PANEL, &panel);
        if (ret) {
-               debug("%s: panel device error %d\n", __func__, ret);
+               pr_err("%s: panel device error %d\n", __func__, ret);
                return ret;
        }
 
        ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(panel),
                                           0, &timings);
        if (ret) {
-               debug("%s: decode display timing error %d\n",
-                     __func__, ret);
+               pr_err("%s: decode display timing error %d\n", __func__, ret);
                return ret;
        }
 
        rate = clk_set_rate(&pclk, timings.pixelclock.typ);
        if (rate < 0) {
-               debug("%s: fail to set pixel clock %d hz %d hz\n",
-                     __func__, timings.pixelclock.typ, rate);
+               pr_err("%s: fail to set pixel clock %d hz %d hz\n",
+                      __func__, timings.pixelclock.typ, rate);
                return rate;
        }
 
-       debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
-             timings.pixelclock.typ, rate);
+       pr_info("%s: Set pixel clock req %d hz get %d hz\n", __func__,
+               timings.pixelclock.typ, rate);
 
        /* TODO Below parameters are hard-coded for the moment... */
        priv->l2bpp = VIDEO_BPP16;
@@ -417,12 +416,12 @@ static int stm32_ltdc_probe(struct udevice *dev)
        priv->crop_h = timings.vactive.typ;
        priv->alpha = 0xFF;
 
-       debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
-             timings.hactive.typ, timings.vactive.typ,
-             VNBITS(priv->l2bpp), uc_plat->base);
-       debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
-             priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
-             priv->bg_col_argb, priv->alpha);
+       pr_info("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
+               timings.hactive.typ, timings.vactive.typ,
+               VNBITS(priv->l2bpp), uc_plat->base);
+       pr_info("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
+               priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
+               priv->bg_col_argb, priv->alpha);
 
        /* Configure & start LTDC */
        stm32_ltdc_set_mode(priv, &timings);
@@ -437,22 +436,22 @@ static int stm32_ltdc_probe(struct udevice *dev)
        if (bridge) {
                ret = video_bridge_set_backlight(bridge, 80);
                if (ret) {
-                       debug("%s: fail to set backlight\n", __func__);
+                       pr_err("%s: fail to set backlight\n", __func__);
                        return ret;
                }
        } else {
                ret = panel_enable_backlight(panel);
                if (ret) {
-                       debug("%s: panel %s enable backlight error %d\n",
-                             __func__, panel->name, ret);
+                       pr_err("%s: panel %s enable backlight error %d\n",
+                              __func__, panel->name, ret);
                        return ret;
                }
        }
 #else
        ret = panel_enable_backlight(panel);
        if (ret) {
-               debug("%s: panel %s enable backlight error %d\n",
-                     __func__, panel->name, ret);
+               pr_err("%s: panel %s enable backlight error %d\n",
+                      __func__, panel->name, ret);
                return ret;
        }
 #endif
@@ -468,7 +467,8 @@ static int stm32_ltdc_bind(struct udevice *dev)
        uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES *
                        CONFIG_VIDEO_STM32_MAX_YRES *
                        (CONFIG_VIDEO_STM32_MAX_BPP >> 3);
-       debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size);
+       pr_info("%s: frame buffer max size %d bytes\n", __func__,
+               uc_plat->size);
 
        return 0;
 }
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to