On 15.03.2018 11:56, Jacopo Mondi wrote:
> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
> decoder, connected to the on-chip LVDS encoder output on one side
> and to HDMI encoder ADV7511w on the other one.
>
> As the decoder does not need any configuration it has been so-far
> omitted from DTS. Now that a driver is available, describe it in DT
> as well.
>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>

Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>

 --
Regards
Andrzej
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 
> +++++++++++++++++++++++---
>  1 file changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts 
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> index c0fd144..69f43b8 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -42,6 +42,33 @@
>                       };
>               };
>       };
> +
> +     thc63lvd1024: lvds-decoder {
> +             compatible = "thine,thc63lvd1024";
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             reg = <0>;
> +
> +                             thc63lvd1024_in_0: endpoint {
> +                                     remote-endpoint = <&lvds0_out>;
> +                             };
> +                     };
> +
> +                     port@2{
> +                             reg = <2>;
> +
> +                             thc63lvd1024_out_2: endpoint {
> +                                     remote-endpoint = <&adv7511_in>;
> +                             };
> +
> +                     };
> +
> +             };
> +     };
>  };
>  
>  &avb {
> @@ -98,7 +125,7 @@
>                       port@0 {
>                               reg = <0>;
>                               adv7511_in: endpoint {
> -                                     remote-endpoint = <&lvds0_out>;
> +                                     remote-endpoint = <&thc63lvd1024_out_2>;
>                               };
>                       };
>  
> @@ -152,8 +179,8 @@
>  
>       ports {
>               port@1 {
> -                     endpoint {
> -                             remote-endpoint = <&adv7511_in>;
> +                     lvds0_out: endpoint {
> +                             remote-endpoint = <&thc63lvd1024_in_0>;
>                       };
>               };
>       };


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to