From: Hans Verkuil <hans.verk...@cisco.com> Some boards (amlogic) have two CEC controllers: the DesignWare controller and their own CEC controller (meson ao-cec).
Since the CEC line is not hooked up to the DW controller we need a way to disable that controller. This patch series adds the cec-disable property for that purpose. Regards, Hans Changes since v1: - Move the dts change to meson-gx.dtsi since according to Neil it is valid for all meson-gx boards. - Fix bad subject line of patch 1. Hans Verkuil (3): dt-bindings: display: dw_hdmi.txt: add cec-disable property drm: bridge: dw-hdmi: check the cec-disable property arm64: dts: meson-gx.dtsi: add cec-disable Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt | 3 +++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 + drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++- 3 files changed, 6 insertions(+), 1 deletion(-) -- 2.15.1 _______________________________________________ dri-devel mailing list email@example.com https://lists.freedesktop.org/mailman/listinfo/dri-devel