Hi Philippe,

On Monday, 14 May 2018 21:58:48 EEST Philippe CORNU wrote:
> On 05/14/2018 12:33 PM, Andrzej Hajda wrote:
> > On 14.05.2018 11:38, Philippe CORNU wrote:
> >> On 04/25/2018 09:53 AM, Philippe Cornu wrote:
> >>> Add the optional power supplies using the description found in
> >>> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".
> >>>
> >>> The sii902x input IOs are not "io safe" so it is important to
> >>> enable/disable voltage regulators during probe/remove phases to
> >>> avoid damages.
> > 
> > What exactly does it mean? Ie I understand that the chip has some
> > limitations, but why enabling/disabling regulators in probe/remove
> > should solve it?
> 
> thank you for your comment.
> 
> And sorry for the "bad" explanation in the 2nd paragraph about the fact 
> that inputs are not "io safe". I added this 2nd paragraph in v2 
> following a good comment from Laurent on adding the management of the 
> regulators outside the probe/remove for a better power consumption 
> management (enable/disable regulators only when the ic is used for 
> displaying something for instance...). But after a deeper analysis, I 
> realized that the only way to improve the power consumption is to 
> implement & test the sii902x various sleep modes, that is out-of-scope 
> of this small patch and also out-of-scope of my test board I use on 
> which the sii902x bridge ic power consumption is very low compare to the 
> rest of the system...
> 
> I will remove this "explanation" in v3 as it creates confusion.

I'd rather keep it and expand it explain why enabling/disabling regulators at 
probe/remove solves the problem. Your patch otherwise looks OK (although if 
you submit a v3 anyway you could also rename err_disable_regulator to 
err_disable_regulators).

> >>> Signed-off-by: Philippe Cornu <philippe.co...@st.com>
> >>> ---
> >>> 
> >>> drivers/gpu/drm/bridge/sii902x.c | 38 ++++++++++++++++++++++++++++++----
> >>> 1 file changed, 34 insertions(+), 4 deletions(-)

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to