Use defined macros by the way.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 47 ++++++++++++++++++++++++-----------
1 files changed, 32 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c
b/drivers/gpu/drm/radeon/r600_hdmi.c
index 30e616a..c308432 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -417,34 +417,51 @@ void r600_hdmi_update_audio_settings(struct drm_encoder
*encoder)
if (status_bits & AUDIO_STATUS_EMPHASIS)
iec |= 1 << 3;
- iec |= category_code << 8;
+ iec |= HDMI0_60958_CS_CATEGORY_CODE(category_code);
switch (rate) {
- case 32000: iec |= 0x3 << 24; break;
- case 44100: iec |= 0x0 << 24; break;
- case 88200: iec |= 0x8 << 24; break;
- case 176400: iec |= 0xc << 24; break;
- case 48000: iec |= 0x2 << 24; break;
- case 96000: iec |= 0xa << 24; break;
- case 192000: iec |= 0xe << 24; break;
+ case 32000:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x3);
+ break;
+ case 44100:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x0);
+ break;
+ case 48000:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x2);
+ break;
+ case 88200:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x8);
+ break;
+ case 96000:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xa);
+ break;
+ case 176400:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xc);
+ break;
+ case 192000:
+ iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xe);
+ break;
}
WREG32(HDMI0_60958_0 + offset, iec);
iec = 0;
switch (bps) {
- case 16: iec |= 0x2; break;
- case 20: iec |= 0x3; break;
- case 24: iec |= 0xb; break;
+ case 16:
+ iec |= HDMI0_60958_CS_WORD_LENGTH(0x2);
+ break;
+ case 20:
+ iec |= HDMI0_60958_CS_WORD_LENGTH(0x3);
+ break;
+ case 24:
+ iec |= HDMI0_60958_CS_WORD_LENGTH(0xb);
+ break;
}
if (status_bits & AUDIO_STATUS_V)
iec |= 0x5 << 16;
-
WREG32_P(HDMI0_60958_1 + offset, iec, ~0x5000f);
- /* 0x021 or 0x031 sets the audio frame length */
- WREG32(HDMI0_VBI_PACKET_CONTROL + offset, 0x31);
- r600_hdmi_audioinfoframe(encoder, channels-1, 0, 0, 0, 0, 0, 0, 0);
+ r600_hdmi_audioinfoframe(encoder, channels - 1, 0, 0, 0, 0, 0, 0, 0);
r600_hdmi_audio_workaround(encoder);
}
--
1.7.7
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
