And clean them up a bit, as usual.
Signed-off-by: Daniel Vetter <daniel.vet...@intel.com>
---
include/drm/drm_crtc.h | 126 +++++++++++++++++++++++++++++++----------
1 file changed, 97 insertions(+), 29 deletions(-)
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 5afe2deb76b7..0cfc098f31d3 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -724,35 +724,25 @@ struct drm_crtc_funcs {
/**
* struct drm_crtc - central CRTC control structure
- * @dev: parent DRM device
- * @port: OF node used by drm_of_find_possible_crtcs()
- * @head: list management
- * @name: human readable name, can be overwritten by the driver
- * @mutex: per-CRTC locking
- * @base: base KMS object for ID tracking etc.
- * @primary: primary plane for this CRTC
- * @cursor: cursor plane for this CRTC
- * @cursor_x: current x position of the cursor, used for universal cursor
planes
- * @cursor_y: current y position of the cursor, used for universal cursor
planes
- * @enabled: is this CRTC enabled?
- * @mode: current mode timings
- * @hwmode: mode timings as programmed to hw regs
- * @x: x position on screen
- * @y: y position on screen
- * @funcs: CRTC control functions
- * @gamma_size: size of gamma ramp
- * @gamma_store: gamma ramp values
- * @helper_private: mid-layer private data
- * @properties: property tracking for this CRTC
*
* Each CRTC may have one or more connectors associated with it. This
structure
* allows the CRTC to be controlled.
*/
struct drm_crtc {
+ /** @dev: parent DRM device */
struct drm_device *dev;
+ /** @port: OF node used by drm_of_find_possible_crtcs(). */
struct device_node *port;
+ /**
+ * @head:
+ *
+ * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list.
+ * Invariant over the lifetime of @dev and therefore does not need
+ * locking.
+ */
struct list_head head;
+ /** @name: human readable name, can be overwritten by the driver */
char *name;
/**
@@ -767,10 +757,25 @@ struct drm_crtc {
*/
struct drm_modeset_lock mutex;
+ /** @base: base KMS object for ID tracking etc. */
struct drm_mode_object base;
- /* primary and cursor planes for CRTC */
+ /**
+ * @primary:
+ * Primary plane for this CRTC. Note that this is only
+ * relevant for legacy IOCTL, it specifies the plane implicitly used by
+ * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance
+ * beyond that.
+ */
struct drm_plane *primary;
+
+ /**
+ * @cursor:
+ * Cursor plane for this CRTC. Note that this is only relevant for
+ * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR
+ * and SETCURSOR2 IOCTLs. It does not have any significance
+ * beyond that.
+ */
struct drm_plane *cursor;
/**
@@ -779,30 +784,94 @@ struct drm_crtc {
*/
unsigned index;
- /* position of cursor plane on crtc */
+ /**
+ * @cursor_x: Current x position of the cursor, used for universal
+ * cursor planes because the SETCURSOR IOCTL only can update the
+ * framebuffer without supplying the coordinates. Drivers should not use
+ * this directly, atomic drivers should look at &drm_plane_state.crtc_x
+ * of the cursor plane instead.
+ */
int cursor_x;
+ /**
+ * @cursor_y: Current y position of the cursor, used for universal
+ * cursor planes because the SETCURSOR IOCTL only can update the
+ * framebuffer without supplying the coordinates. Drivers should not use
+ * this directly, atomic drivers should look at &drm_plane_state.crtc_y
+ * of the cursor plane instead.
+ */
int cursor_y;
+ /**
+ * @enabled:
+ *
+ * Is this CRTC enabled? Should only be used by legacy drivers, atomic
+ * drivers should instead consult &drm_crtc_state.enable and
+ * &drm_crtc_state.active. Atomic drivers can update this by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
bool enabled;
- /* Requested mode from modesetting. */
+ /**
+ * @mode:
+ *
+ * Current mode timings. Should only be used by legacy drivers, atomic
+ * drivers should instead consult &drm_crtc_state.mode. Atomic drivers
+ * can update this by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
struct drm_display_mode mode;
- /* Programmed mode in hw, after adjustments for encoders,
- * crtc, panel scaling etc. Needed for timestamping etc.
+ /**
+ * @hwmode:
+ *
+ * Programmed mode in hw, after adjustments for encoders, crtc, panel
+ * scaling etc. Should only be used by legacy drivers, for high
+ * precision vblank timestamps in
+ * drm_calc_vbltimestamp_from_scanoutpos().
+ *
+ * Note that atomic drivers should not use this, but instead use
+ * &drm_crtc_state.adjusted_mode. And for high-precision timestamps
+ * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode,
+ * which is filled out by calling drm_calc_timestamping_constants().
*/
struct drm_display_mode hwmode;
- int x, y;
+ /**
+ * @x:
+ * x position on screen. Should only be used by legacy drivers, atomic
+ * drivers should look at &drm_plane_state.crtc_x of the primary plane
+ * instead. Updated by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ int x;
+ /**
+ * @y:
+ * y position on screen. Should only be used by legacy drivers, atomic
+ * drivers should look at &drm_plane_state.crtc_y of the primary plane
+ * instead. Updated by calling
+ * drm_atomic_helper_update_legacy_modeset_state().
+ */
+ int y;
+
+ /** @funcs: CRTC control functions */
const struct drm_crtc_funcs *funcs;
- /* Legacy FB CRTC gamma size for reporting to userspace */
+ /**
+ * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up
+ * by calling drm_mode_crtc_set_gamma_size().
+ */
uint32_t gamma_size;
+
+ /**
+ * @gamma_store: Gamma ramp values used by the legacy SETGAMME and
+ * GET_GAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size().
+ */
uint16_t *gamma_store;
- /* if you are using the helper */
+ /** @helper_private: mid-layer private data */
const struct drm_crtc_helper_funcs *helper_private;
+ /** @properties: property tracking for this CRTC */
struct drm_object_properties properties;
/**
@@ -872,7 +941,6 @@ struct drm_crtc {
*
* spinlock to protect the fences in the fence_context.
*/
-
spinlock_t fence_lock;
/**
* @fence_seqno:
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
