For atomic modeset, we need to set the sync signal polarities from the
CRTC state structure rather than the legacy mode structure stored in
CRTC. In any case, we should update this from our mode_set_nofb()
method, rather than the commit() method. Move it there, and ensure
that armada_drm_crtc_update() will not overwrite these bits.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/gpu/drm/armada/armada_crtc.c | 47 +++++++++++++++++-------------------
drivers/gpu/drm/armada/armada_crtc.h | 1 -
2 files changed, 22 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/armada/armada_crtc.c
b/drivers/gpu/drm/armada/armada_crtc.c
index 35b2df0fc21c..3cae6587b079 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -115,25 +115,9 @@ static void armada_drm_crtc_update(struct armada_crtc
*dcrtc)
dumb_ctrl |= DUMB_BLANK;
}
- /*
- * The documentation doesn't indicate what the normal state of
- * the sync signals are. Sebastian Hesselbart kindly probed
- * these signals on his board to determine their state.
- *
- * The non-inverted state of the sync signals is active high.
- * Setting these bits makes the appropriate signal active low.
- */
- if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NCSYNC)
- dumb_ctrl |= CFG_INV_CSYNC;
- if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NHSYNC)
- dumb_ctrl |= CFG_INV_HSYNC;
- if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NVSYNC)
- dumb_ctrl |= CFG_INV_VSYNC;
-
- if (dcrtc->dumb_ctrl != dumb_ctrl) {
- dcrtc->dumb_ctrl = dumb_ctrl;
- writel_relaxed(dumb_ctrl, dcrtc->base + LCD_SPU_DUMB_CTRL);
- }
+ armada_updatel(dumb_ctrl,
+ ~(CFG_INV_CSYNC | CFG_INV_HSYNC | CFG_INV_VSYNC),
+ dcrtc->base + LCD_SPU_DUMB_CTRL);
}
static void armada_drm_plane_work_call(struct armada_crtc *dcrtc,
@@ -280,7 +264,6 @@ static void armada_drm_crtc_prepare(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct drm_plane *plane;
- u32 val;
/*
* If we have an overlay plane associated with this CRTC, disable
@@ -300,11 +283,7 @@ static void armada_drm_crtc_prepare(struct drm_crtc *crtc)
drm_crtc_vblank_off(crtc);
- val = dcrtc->dumb_ctrl & ~CFG_DUMB_ENA;
- if (val != dcrtc->dumb_ctrl) {
- dcrtc->dumb_ctrl = val;
- writel_relaxed(val, dcrtc->base + LCD_SPU_DUMB_CTRL);
- }
+ armada_updatel(0, CFG_DUMB_ENA, dcrtc->base + LCD_SPU_DUMB_CTRL);
}
/* The mode_config.mutex will be held for this call */
@@ -516,6 +495,24 @@ static void armada_drm_crtc_mode_set_nofb(struct drm_crtc
*crtc)
val = adj->flags & DRM_MODE_FLAG_NVSYNC ? CFG_VSYNC_INV : 0;
armada_reg_queue_mod(regs, i, val, CFG_VSYNC_INV, LCD_SPU_DMA_CTRL1);
+
+ /*
+ * The documentation doesn't indicate what the normal state of
+ * the sync signals are. Sebastian Hesselbart kindly probed
+ * these signals on his board to determine their state.
+ *
+ * The non-inverted state of the sync signals is active high.
+ * Setting these bits makes the appropriate signal active low.
+ */
+ val = 0;
+ if (adj->flags & DRM_MODE_FLAG_NCSYNC)
+ val |= CFG_INV_CSYNC;
+ if (adj->flags & DRM_MODE_FLAG_NHSYNC)
+ val |= CFG_INV_HSYNC;
+ if (adj->flags & DRM_MODE_FLAG_NVSYNC)
+ val |= CFG_INV_VSYNC;
+ armada_reg_queue_mod(regs, i, val, CFG_INV_CSYNC | CFG_INV_HSYNC |
+ CFG_INV_VSYNC, LCD_SPU_DUMB_CTRL);
armada_reg_queue_end(regs, i);
armada_drm_crtc_update_regs(dcrtc, regs);
diff --git a/drivers/gpu/drm/armada/armada_crtc.h
b/drivers/gpu/drm/armada/armada_crtc.h
index 21338f7c3d7d..775c01c52982 100644
--- a/drivers/gpu/drm/armada/armada_crtc.h
+++ b/drivers/gpu/drm/armada/armada_crtc.h
@@ -85,7 +85,6 @@ struct armada_crtc {
int dpms;
uint32_t cfg_dumb_ctrl;
- uint32_t dumb_ctrl;
uint32_t spu_iopad_ctrl;
spinlock_t irq_lock;
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
