[PATCH v3 16/18] arm64: dts: allwinner: a64: a64-olinuxino: Enable HDMI output

[Jagan Teki]

Enable all necessary HDMI pipeline nodes with HDMI out
connector on a64-olinuxino board.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3f531393eaee..0292149ee40a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -58,12 +58,42 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        wifi_pwrseq: wifi_pwrseq {
                compatible = "mmc-pwrseq-simple";
                reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
        };
 };
 
+&de {
+       status = "okay";
+};
+
+&hdmi {
+       hvcc-supply = <&reg_dldo1>;
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&mixer1 {
+       status = "okay";
+};
+
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins>;
@@ -218,6 +248,10 @@
        vcc-hdmi-supply = <&reg_dldo1>;
 };
 
+&tcon1 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel