On 2018-08-14 03:00, Sean Paul wrote:
From: Sean Paul <seanp...@chromium.org>
This patch adds a 70ms mystery delay to the bridge driver in enable.
By experimentation, it seems like it can go anywhere up until we
initiate semi-auto link training. If we don't have the delay, link
training fails.
I tried to root cause this as best I could, but neither the datasheet
for the panel nor the bridge mention a delay of this magnitude in their
timing requirements. So for now, add the mystery delay until someone
figures out a better fix.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spa...@codeaurora.org>
Signed-off-by: Sean Paul <seanp...@chromium.org>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index d3e27e52ea759..f8a931cf3665e 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -458,6 +458,18 @@ static void ti_sn_bridge_enable(struct drm_bridge
*bridge)
unsigned int val;
int ret;
+ /*
+ * FIXME:
+ * This 70ms was found necessary by experimentation. If it's not
+ * present, link training fails. It seems like it can go anywhere
from
+ * pre_enable() up to semi-auto link training initiation below.
+ *
+ * Neither the datasheet for the bridge nor the panel tested mention
a
+ * delay of this magnitude in the timing requirements. So for now,
add
+ * the mystery delay until someone figures out a better fix.
+ */
Is this newly found issue? Specific to any board config?
+ msleep(70);
+
/* DSI_A lane config */
val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
