Hi Nikolaus, Thank you for the patch.
On Friday, 27 July 2018 17:24:32 EEST H. Nikolaus Schaller wrote: > The opa362 amplifier has two ports, an input (usually connected > to the OMAP3 VENC) and an output port connected to the external > connector. > > These are usually defined as input port@0 and outpt port@1 in > the DT and really distinguished by the reg = <port_num> property > of these nodes. > > But we are missing to define the output port as number 1 so > it does not match the DT entry. > > Signed-off-by: H. Nikolaus Schaller <[email protected]> I think this patch is superseded by "[PATCH v3 36/61] drm/omap: dss: Replace omap_dss_device port number with bitmask" which should get merged in v4.20. > --- > drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c > b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c index > afee1b8b457a..296d46f060b2 100644 > --- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c > +++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c > @@ -208,6 +208,7 @@ static int opa362_probe(struct platform_device *pdev) > dssdev->type = OMAP_DISPLAY_TYPE_VENC; > dssdev->output_type = OMAP_DISPLAY_TYPE_VENC; > dssdev->owner = THIS_MODULE; > + dssdev->port_num = 1; /* second port */ > > r = omapdss_register_output(dssdev); > if (r) { -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
