Em Wed, 12 Sep 2018 17:08:52 +0200
Arnd Bergmann <a...@arndb.de> escreveu:

> The .ioctl and .compat_ioctl file operations have the same prototype so
> they can both point to the same function, which works great almost all
> the time when all the commands are compatible.
> 
> One exception is the s390 architecture, where a compat pointer is only
> 31 bit wide, and converting it into a 64-bit pointer requires calling
> compat_ptr(). Most drivers here will ever run in s390, but since we now
> have a generic helper for it, it's easy enough to use it consistently.
> 
> I double-checked all these drivers to ensure that all ioctl arguments
> are used as pointers or are ignored, but are not interpreted as integer
> values.
> 
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> ---

>  drivers/media/rc/lirc_dev.c                 | 4 +---

> diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
> index f862f1b7f996..077209f414ed 100644
> --- a/drivers/media/rc/lirc_dev.c
> +++ b/drivers/media/rc/lirc_dev.c
> @@ -730,9 +730,7 @@ static const struct file_operations lirc_fops = {
>       .owner          = THIS_MODULE,
>       .write          = ir_lirc_transmit_ir,
>       .unlocked_ioctl = ir_lirc_ioctl,
> -#ifdef CONFIG_COMPAT
> -     .compat_ioctl   = ir_lirc_ioctl,
> -#endif
> +     .compat_ioctl   = generic_compat_ioctl_ptrarg,
>       .read           = ir_lirc_read,
>       .poll           = ir_lirc_poll,
>       .open           = ir_lirc_open,

Adding an infrared remote controller to a s390 mainframe sounds fun :-)

I suspect that one could implement it on a s390 platform 
using gpio-ir-recv and/or gpio-ir-tx drivers. Perhaps one possible
practical usage would be to let the mainframe to send remote
controller codes to adjust the air conditioning system ;-)

From lirc driver's PoV, there's nothing that really prevents one to
do that and use lirc API, and the driver is generic enough to work
on any hardware platform.

I didn't check the implementation of generic_compat_ioctl_ptrarg(),
but assuming it is ok,

Acked-by: Mauro Carvalho Chehab <mchehab+sams...@kernel.org>

Thanks,
Mauro
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to