Hi Andrzej
Am Freitag, 21. September 2018, 08:11:16 CEST schrieb Andrzej Hajda:
> On 20.09.2018 13:20, Heiko Stuebner wrote:
> > Hi Andrzej,
> >
> > Am Montag, 27. August 2018, 13:34:07 CEST schrieb Andrzej Hajda:
> >> On 21.08.2018 16:05, Heiko Stuebner wrote:
> >>> Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well.
> >>> As described in the general dual-dsi devicetree binding, the panel should
> >>> define two input ports and point each of them to one of the used dsi-
> >>> controllers, as well as declare one of them as clock-master.
> >>> This is used to determine the dual-dsi state and get access to both
> >>> controller instances.
> >>>
> >>> Signed-off-by: Heiko Stuebner <he...@sntech.de>
> >>> v4:
> >>> add component directly in probe when adding empty dsi slave controller
> >>> v5:
> >>> use driver-internal mechanism to find dual dsi slave
> >>> ---
> >>> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 105 ++++++++++++++++++
> >>> drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
> >>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
> >>> drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 4 +
> >>> drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
> >>> 5 files changed, 114 insertions(+)
> >>>
> >>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
> >>> b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
> >>> index b3aae8439aa3..e4aee2ccbf4d 100644
> >>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
> >>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
> >>> @@ -218,6 +218,10 @@ struct dw_mipi_dsi_rockchip {
> >>> struct clk *grf_clk;
> >>> struct clk *phy_cfg_clk;
> >>>
> >>> + /* dual-channel */
> >>> + bool is_slave;
> >>> + struct dw_mipi_dsi_rockchip *slave;
> >>> +
> >>> unsigned int lane_mbps; /* per lane */
> >>> u16 input_div;
> >>> u16 feedback_div;
> >>> @@ -226,6 +230,7 @@ struct dw_mipi_dsi_rockchip {
> >>> struct dw_mipi_dsi *dmd;
> >>> const struct rockchip_dw_dsi_chip_data *cdata;
> >>> struct dw_mipi_dsi_plat_data pdata;
> >>> + int devcnt;
> >>> };
> >>>
> >>> struct dphy_pll_parameter_map {
> >>> @@ -602,6 +607,8 @@ dw_mipi_dsi_encoder_atomic_check(struct drm_encoder
> >>> *encoder,
> >>> }
> >>>
> >>> s->output_type = DRM_MODE_CONNECTOR_DSI;
> >>> + if (dsi->slave)
> >>> + s->output_flags = ROCKCHIP_OUTPUT_DSI_DUAL;
> >>>
> >>> return 0;
> >>> }
> >>> @@ -617,6 +624,8 @@ static void dw_mipi_dsi_encoder_enable(struct
> >>> drm_encoder *encoder)
> >>> return;
> >>>
> >>> pm_runtime_get_sync(dsi->dev);
> >>> + if (dsi->slave)
> >>> + pm_runtime_get_sync(dsi->slave->dev);
> >>>
> >>> /*
> >>> * For the RK3399, the clk of grf must be enabled before writing grf
> >>> @@ -630,6 +639,8 @@ static void dw_mipi_dsi_encoder_enable(struct
> >>> drm_encoder *encoder)
> >>> }
> >>>
> >>> dw_mipi_dsi_rockchip_config(dsi, mux);
> >>> + if (dsi->slave)
> >>> + dw_mipi_dsi_rockchip_config(dsi->slave, mux);
> >>>
> >>> clk_disable_unprepare(dsi->grf_clk);
> >>> }
> >>> @@ -638,6 +649,8 @@ static void dw_mipi_dsi_encoder_disable(struct
> >>> drm_encoder *encoder)
> >>> {
> >>> struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
> >>>
> >>> + if (dsi->slave)
> >>> + pm_runtime_put(dsi->slave->dev);
> >>> pm_runtime_put(dsi->dev);
> >>> }
> >>>
> >>> @@ -673,14 +686,76 @@ static int rockchip_dsi_drm_create_encoder(struct
> >>> dw_mipi_dsi_rockchip *dsi,
> >>> return 0;
> >>> }
> >>>
> >>> +static int dw_mipi_dsi_rockchip_match_second(struct device *dev, void
> >>> *data)
> >>> +{
> >>> + struct dw_mipi_dsi_rockchip *dsi = data;
> >>> + struct drm_bridge *bridge1, *bridge2;
> >>> + struct drm_panel *panel1, *panel2;
> >>> + int ret;
> >>> +
> >>> + if (dsi->dev->of_node == dev->of_node)
> >>> + return 0;
> >>> +
> >>> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 1, 0,
> >>> + &panel1, &bridge1);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0,
> >>> + &panel2, &bridge2);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + return (panel1 == panel2) && (bridge1 == bridge2);
> >>> +}
> >>> +
> >>> static int dw_mipi_dsi_rockchip_bind(struct device *dev,
> >>> struct device *master,
> >>> void *data)
> >>> {
> >>> struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
> >>> struct drm_device *drm_dev = data;
> >>> + struct device *second;
> >>> + bool master1, master2;
> >>> int ret;
> >>>
> >>> + second = driver_find_device(dsi->dev->driver, NULL, dsi,
> >>> + dw_mipi_dsi_rockchip_match_second);
> >> This function performs get_device on the matched device, so you should
> >> probably call somewhere put_device to make the counter balanced.
> >> I hope second device is somehow guarded by component framework from
> >> being unbound in unexpected moments (ie. when in use by master).
> > Thanks for that catch, I'll add the put_device.
> >
> >
> >>> + if (IS_ERR(second))
> >>> + return PTR_ERR(second);
> >>> +
> >>> + if (second) {
> >>> + master1 = of_property_read_bool(dsi->dev->of_node,
> >>> + "clock-master");
> >>> + master2 = of_property_read_bool(second->of_node,
> >>> + "clock-master");
> >>> +
> >>> + if (master1 && master2) {
> >>> + DRM_DEV_ERROR(dsi->dev, "only one clock-master
> >>> allowed\n");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + if (!master1 && !master2) {
> >>> + DRM_DEV_ERROR(dsi->dev, "no clock-master defined\n");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + /* we are the slave in dual-DSI */
> >>> + if (!master1) {
> >>> + dsi->is_slave = true;
> >>> + return 0;
> >>> + }
> >>> +
> >>> + dsi->slave = dev_get_drvdata(second);
> >>> + if (!dsi->slave) {
> >>> + DRM_DEV_ERROR(dev, "could not get slaves data\n");
> >>> + return -ENODEV;
> >>> + }
> >>> +
> >>> + dsi->slave->is_slave = true;
> >>> + dw_mipi_dsi_set_slave(dsi->dmd, dsi->slave->dmd);
> >>> + }
> >>> +
> >>> ret = clk_prepare_enable(dsi->pllref_clk);
> >>> if (ret) {
> >>> DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
> >>> @@ -708,6 +783,9 @@ static void dw_mipi_dsi_rockchip_unbind(struct device
> >>> *dev,
> >>> {
> >>> struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
> >>>
> >>> + if (dsi->is_slave)
> >>> + return;
> >>> +
> >>> dw_mipi_dsi_unbind(dsi->dmd);
> >>>
> >>> clk_disable_unprepare(dsi->pllref_clk);
> >>> @@ -749,6 +827,14 @@ static const struct dw_mipi_dsi_host_ops
> >>> dw_mipi_dsi_rockchip_host_ops = {
> >>> .detach = dw_mipi_dsi_rockchip_host_detach,
> >>> };
> >>>
> >>> +static int dw_mipi_dsi_rockchip_cnt_dev(struct device *dev, void *data)
> >>> +{
> >>> + struct dw_mipi_dsi_rockchip *dsi = data;
> >>> +
> >>> + dsi->devcnt++;
> >>> + return 0;
> >>> +}
> >>> +
> >>> static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
> >>> {
> >>> struct device *dev = &pdev->dev;
> >>> @@ -835,6 +921,22 @@ static int dw_mipi_dsi_rockchip_probe(struct
> >>> platform_device *pdev)
> >>> goto err_clkdisable;
> >>> }
> >>>
> >>> + /*
> >>> + * All dsi child devices will have been created, so we can check
> >>> + * their number and add the component here if there will be no
> >>> + * host-attach call.
> >> I guess you mean that in this point all child devices have been created
> >> (remove 'will'), but it may be false assumption, there is always
> >> possibility to create device on the fly - see
> >> mipi_dsi_device_register_full.
> >> You cannot assume that in certain point in time there will be no more
> >> devices on the bus.
> >>
> >> I am not sure of the purpose of this code. Why do you want to behave
> >> differently if there are no child devs?
> > That's all related to the suggestion of doing component_add in the
> > host-attach callback. If the device doesn't have active children its
> > component will never get added and the whole drm component structure
> > will wait forever and never probe the drm driver, hence add the component
> > when no child will be present.
>
> What wrong with it? If the resource is required, then consumer should
> wait for it, if there is a problem with provider it can be forever, I
> think it is clear and fair rule.
>
> > [This is of course part of handling my empty dsi slave].
>
> Could you elaborate it? If dsi slave has no downstream device why is it
> active at all?
As in all instances before, you were right on pointing out the flaw here :-)
DSI devices can of course also sit on completely other buses, like i2c
and attach from there by creating their own dsi device on the bus.
I've prepared v6 which should address that in a more elegant manner
while keeping the component_attach in the host-attach callback.
Thanks
Heiko
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
