On Fri, 2018-10-12 at 11:42 -0700, Radhakrishna Sripada wrote:
> Use the newly added "max bpc" connector property to limit pipe bpp.
>
> V3: Use drm_connector_state to access the "max bpc" property
> V4: Initialize the drm property, add suuport to DP(Ville)
> V5: Use the property in the connector and fix CI failure(Ville)
> V6: Use the core function to attach max_bpc property, remove the
> redundant
> clamping of pipe bpp based on connector info
> V7: Fix Checkpatch warnings
> V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville)
> V12: Fix debug message(Ville)
> V13: Remove the redundant check and simplify the check logic(Stan)
> V14: Fix the check in connected_sink_max_bpp(Stan)
>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
> Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> Cc: Kishore Kadiyala <kishore.kadiy...@intel.com>
> Cc: Manasi Navare <manasi.d.nav...@intel.com>
> Cc: Stanislav Lisovskiy <stanislav.lisovs...@intel.com>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.srip...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 49 ++++++++++++++++++++----
> ------------
> drivers/gpu/drm/i915/intel_dp.c | 4 +++
> drivers/gpu/drm/i915/intel_hdmi.c | 5 ++++
> 3 files changed, 37 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 980f4ea68e48..ddcb7da3a4e1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10791,30 +10791,37 @@ static void
> intel_modeset_update_connector_atomic_state(struct drm_device *dev)
> drm_connector_list_iter_end(&conn_iter);
> }
>
> -static void
> -connected_sink_compute_bpp(struct intel_connector *connector,
> - struct intel_crtc_state *pipe_config)
> +static int
> +connected_sink_max_bpp(const struct drm_connector_state *conn_state,
> + struct intel_crtc_state *pipe_config)
> {
> - const struct drm_display_info *info = &connector-
> >base.display_info;
> - int bpp = pipe_config->pipe_bpp;
> + int bpp;
> + struct drm_display_info *info = &conn_state->connector-
> >display_info;
>
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp
> constrains\n",
> - connector->base.base.id,
> - connector->base.name);
> -
> - /* Don't use an invalid EDID bpc value */
> - if (info->bpc != 0 && info->bpc * 3 < bpp) {
> - DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID
> reported max of %d\n",
> - bpp, info->bpc * 3);
> - pipe_config->pipe_bpp = info->bpc * 3;
> + switch (conn_state->max_bpc) {
> + case 6 ... 7:
> + bpp = 6 * 3;
> + case 8 ... 9:
> + bpp = 8 * 3;
> + break;
> + case 10 ... 11:
> + bpp = 10 * 3;
> + break;
> + case 12:
> + bpp = 12 * 3;
> + break;
> + default:
> + return -EINVAL;
> }
Sorry, but one more comment(just wanted to give "reviewed-by" and
noticed this): there is missing break here, after case 6 .. 7.
>
> - /* Clamp bpp to 8 on screens without EDID 1.4 */
> - if (info->bpc == 0 && bpp > 24) {
> - DRM_DEBUG_KMS("clamping display bpp (was %d) to
> default limit of 24\n",
> - bpp);
> - pipe_config->pipe_bpp = 24;
> + if (bpp < pipe_config->pipe_bpp) {
> + DRM_DEBUG_KMS("Limiting display bpp to %d instead of
> Edid bpp "
> + "%d, requested bpp %d, max platform
> bpp %d\n", bpp,
> + 3 * info->bpc, 3 * conn_state-
> >max_requested_bpc,
> + pipe_config->pipe_bpp);
> + pipe_config->pipe_bpp = bpp;
> }
> + return 0;
> }
>
> static int
> @@ -10845,8 +10852,8 @@ compute_baseline_pipe_bpp(struct intel_crtc
> *crtc,
> if (connector_state->crtc != &crtc->base)
> continue;
>
> - connected_sink_compute_bpp(to_intel_connector(connec
> tor),
> - pipe_config);
> + if (connected_sink_max_bpp(connector_state,
> pipe_config) < 0)
> + return -EINVAL;
> }
>
> return bpp;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index 13ff89be6ad6..5f594430b2a4 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5735,6 +5735,10 @@ intel_dp_add_properties(struct intel_dp
> *intel_dp, struct drm_connector *connect
> intel_attach_force_audio_property(connector);
>
> intel_attach_broadcast_rgb_property(connector);
> + if (HAS_GMCH_DISPLAY(dev_priv))
> + drm_connector_attach_max_bpc_property(connector, 6,
> 10);
> + else if (INTEL_GEN(dev_priv) >= 5)
> + drm_connector_attach_max_bpc_property(connector, 6,
> 12);
>
> if (intel_dp_is_edp(intel_dp)) {
> u32 allowed_scalers;
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> index 2c53efc463e6..3158ab085a30 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -2103,11 +2103,16 @@ static const struct drm_encoder_funcs
> intel_hdmi_enc_funcs = {
> static void
> intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct
> drm_connector *connector)
> {
> + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> +
> intel_attach_force_audio_property(connector);
> intel_attach_broadcast_rgb_property(connector);
> intel_attach_aspect_ratio_property(connector);
> drm_connector_attach_content_type_property(connector);
> connector->state->picture_aspect_ratio =
> HDMI_PICTURE_ASPECT_NONE;
> +
> + if (!HAS_GMCH_DISPLAY(dev_priv))
> + drm_connector_attach_max_bpc_property(connector, 8,
> 12);
> }
>
> /*
--
Best Regards,
Lisovskiy Stanislav
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
