Unlike hblk, the vblk timings should follow an equation to compute
the desired value for lane 4 devices and rest of devices it would be 0.
BSP code from BPI-M64-bsp is computing vblk as for 4-lane devices
(in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
tmp = (ht*dsi_pixel_bits[format]/8)*vt-(4+dsi_hblk+2);
dsi_vblk = (lane-tmp%lane);
So, update the vblk timing calculation accordingly.
Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Tested-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v3:
- new patch
Changes for v2:
- none
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 20e330186b7f..42bd7506abaf 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -511,8 +511,19 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
* Allwinner BSP is using a rather convoluted calculation
* there only for 4 lanes. However, using 0 (the !4 lanes
* case) even with a 4 lanes screen seems to work...
+ *
+ * The vertical blank is set using a blanking packet (4 bytes +
+ * payload + 2 bytes). Its minimal size is therefore 6 bytes
*/
- vblk = 0;
+#define VBLK_PACKET_OVERHEAD 6
+ if (device->lanes == 4) {
+ int tmp;
+
+ tmp = (mode->htotal * Bpp) * mode->vtotal - (hblk +
VBLK_PACKET_OVERHEAD);
+ vblk =(device->lanes - tmp % device->lanes);
+ } else {
+ vblk = 0;
+ }
/* How many bytes do we need to send all payloads? */
bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);
--
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
