On 11/14/2018 05:47 PM, Jordan Crouse wrote:
Thanks for  the patch. Perhaps a small blurb here for the commit log to let
folks know what your intent was.


I will add an explanation. The intent is clear to me from the commit message, but perhaps not for everyone.

On Wed, Nov 14, 2018 at 05:24:12PM -0500, Jonathan Marek wrote:
Signed-off-by: Jonathan Marek <jonat...@marek.ca>
---
  drivers/gpu/drm/msm/Kconfig       |  4 ++--
  drivers/gpu/drm/msm/msm_debugfs.c |  2 +-
  drivers/gpu/drm/msm/msm_drv.c     | 15 +++++++++++----
  include/linux/qcom_scm.h          |  3 +++
  4 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 843a9d40c05e..cf549f1ed403 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -2,7 +2,7 @@
  config DRM_MSM
        tristate "MSM DRM"
        depends on DRM
-       depends on ARCH_QCOM || (ARM && COMPILE_TEST)
+       depends on ARCH_QCOM || SOC_IMX5 || (ARM && COMPILE_TEST)
        depends on OF && COMMON_CLK
        depends on MMU
        select QCOM_MDT_LOADER if ARCH_QCOM
@@ -11,7 +11,7 @@ config DRM_MSM
        select DRM_PANEL
        select SHMEM
        select TMPFS
-       select QCOM_SCM
+       select QCOM_SCM if ARCH_QCOM
        select WANT_DEV_COREDUMP
        select SND_SOC_HDMI_CODEC if SND_SOC
        select SYNC_FILE
diff --git a/drivers/gpu/drm/msm/msm_debugfs.c 
b/drivers/gpu/drm/msm/msm_debugfs.c
index f0da0d3c8a80..1ca99ca356a4 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -235,7 +235,7 @@ int msm_debugfs_init(struct drm_minor *minor)
        debugfs_create_file("gpu", S_IRUSR, minor->debugfs_root,
                dev, &msm_gpu_fops);
- if (priv->kms->funcs->debugfs_init) {
+       if (priv->kms && priv->kms->funcs->debugfs_init) {
                ret = priv->kms->funcs->debugfs_init(priv->kms, minor);
                if (ret)
                        return ret;
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 9f219e02f3c7..a10cc0298d38 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -344,6 +344,7 @@ static int msm_drm_uninit(struct device *dev)
        return 0;
  }
+#define KMS_HEADLESS 1
  #define KMS_MDP4 4
  #define KMS_MDP5 5
  #define KMS_DPU  3
@@ -495,6 +496,9 @@ static int msm_drm_init(struct device *dev, struct 
drm_driver *drv)
        msm_gem_shrinker_init(ddev);
switch (get_mdp_ver(pdev)) {
+       case KMS_HEADLESS:
+               priv->kms = kms = NULL;

I don't think you need to set priv->kms, it should come in as NULL. I would
normally say that you should set kms to NULL when it is declared, but I kind of
like pointing it out to the user.


It comes as NULL, but initializing it here matches the other cases in the switch (at the cost of 12 characters).

+               break;
        case KMS_MDP4:
                kms = mdp4_kms_init(ddev);
                priv->kms = kms;
@@ -633,7 +637,7 @@ static int msm_drm_init(struct device *dev, struct 
drm_driver *drv)
        drm_mode_config_reset(ddev);
#ifdef CONFIG_DRM_FBDEV_EMULATION
-       if (fbdev)
+       if (kms && fbdev)
                priv->fbdev = msm_fbdev_init(ddev);
  #endif
@@ -1315,9 +1319,11 @@ static int msm_pdev_probe(struct platform_device *pdev)
        struct component_match *match = NULL;
        int ret;
- ret = add_display_components(&pdev->dev, &match);
-       if (ret)
-               return ret;
+       if (get_mdp_ver(pdev) != KMS_HEADLESS) {
+               ret = add_display_components(&pdev->dev, &match);
+               if (ret)
+                       return ret;
+       }
ret = add_gpu_components(&pdev->dev, &match);
        if (ret)
@@ -1342,6 +1348,7 @@ static int msm_pdev_remove(struct platform_device *pdev)
  }
static const struct of_device_id dt_match[] = {
+       { .compatible = "qcom,adreno-headless", .data = (void *)KMS_HEADLESS },
        { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
        { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
        { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 06996ad4f2bc..1637385bcc17 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -67,6 +67,9 @@ extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 
size, u32 spare);
  extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
  extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
  #else
+
+#include <linux/errno.h>
+

This looks like a separate patch, albeit a useful one.


Yes, that isn't part of this patch. Oops.

  static inline
  int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
  {

Jordan


Jonathan
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to