Boris Brezillon <boris.brezil...@bootlin.com> writes:
> On Thu, 15 Nov 2018 12:39:42 -0800
> Eric Anholt <e...@anholt.net> wrote:
>
>> Boris Brezillon <boris.brezil...@bootlin.com> writes:
>>
>> > We are about to use vc4_plane_mode_set() in the async check path, and
>> > async updates require that LBM size stay the same since they reuse the
>> > LBM from the previous state. So we definitely don't want to allocate a
>> > new LBM region that we know for sure will be free right away.
>> >
>> > Move the LBM allocation out of vc4_plane_mode_set() and call the new
>> > function (vc4_plane_update_lbm()) from vc4_plane_atomic_check().
>> >
>> > Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
>> > ---
>> > drivers/gpu/drm/vc4/vc4_drv.h | 1 +
>> > drivers/gpu/drm/vc4/vc4_plane.c | 82 ++++++++++++++++++++++-----------
>> > 2 files changed, 55 insertions(+), 28 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
>> > index bd6ef1f31822..9ed05fb61eb6 100644
>> > --- a/drivers/gpu/drm/vc4/vc4_drv.h
>> > +++ b/drivers/gpu/drm/vc4/vc4_drv.h
>> > @@ -338,6 +338,7 @@ struct vc4_plane_state {
>> > u32 pos0_offset;
>> > u32 pos2_offset;
>> > u32 ptr0_offset;
>> > + u32 lbm_offset;
>> >
>> > /* Offset where the plane's dlist was last stored in the
>> > * hardware at vc4_crtc_atomic_flush() time.
>> > diff --git a/drivers/gpu/drm/vc4/vc4_plane.c
>> > b/drivers/gpu/drm/vc4/vc4_plane.c
>> > index f6e3e8d33115..392a51f2bf8f 100644
>> > --- a/drivers/gpu/drm/vc4/vc4_plane.c
>> > +++ b/drivers/gpu/drm/vc4/vc4_plane.c
>> > @@ -452,6 +452,43 @@ static void vc4_write_scaling_parameters(struct
>> > drm_plane_state *state,
>> > }
>> > }
>> >
>> > +static int vc4_plane_update_lbm(struct drm_plane_state *state)
>> > +{
>> > + struct vc4_dev *vc4 = to_vc4_dev(state->plane->dev);
>> > + struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
>> > + unsigned long irqflags;
>> > + u32 lbm_size;
>> > +
>> > + lbm_size = vc4_lbm_size(state);
>> > + if (!lbm_size)
>> > + return 0;
>> > +
>> > + if (WARN_ON(!vc4_state->lbm_offset))
>> > + return -EINVAL;
>> > +
>> > + /* Allocate the LBM memory that the HVS will use for temporary
>> > + * storage due to our scaling/format conversion.
>> > + */
>> > + if (!vc4_state->lbm.allocated) {
>> > + int ret;
>> > +
>> > + spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
>> > + ret = drm_mm_insert_node_generic(&vc4->hvs->lbm_mm,
>> > + &vc4_state->lbm,
>> > + lbm_size, 32, 0, 0);
>> > + spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
>> > +
>> > + if (ret)
>> > + return ret;
>> > + } else {
>> > + WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
>> > + }
>> > +
>> > + vc4_state->dlist[vc4_state->lbm_offset] = vc4_state->lbm.start;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > /* Writes out a full display list for an active plane to the plane's
>> > * private dlist state.
>> > */
>> > @@ -469,31 +506,12 @@ static int vc4_plane_mode_set(struct drm_plane
>> > *plane,
>> > bool mix_plane_alpha;
>> > bool covers_screen;
>> > u32 scl0, scl1, pitch0;
>> > - u32 lbm_size, tiling;
>> > - unsigned long irqflags;
>> > + u32 tiling;
>> > u32 hvs_format = format->hvs;
>> > int ret, i;
>> >
>> > - ret = vc4_plane_setup_clipping_and_scaling(state);
>> > - if (ret)
>> > - return ret;
>> > -
>> > - /* Allocate the LBM memory that the HVS will use for temporary
>> > - * storage due to our scaling/format conversion.
>> > - */
>> > - lbm_size = vc4_lbm_size(state);
>> > - if (lbm_size) {
>> > - if (!vc4_state->lbm.allocated) {
>> > - spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
>> > - ret = drm_mm_insert_node_generic(&vc4->hvs->lbm_mm,
>> > - &vc4_state->lbm,
>> > - lbm_size, 32, 0, 0);
>> > - spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
>> > - } else {
>> > - WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
>> > - }
>> > - }
>> >
>> > + ret = vc4_plane_setup_clipping_and_scaling(state);
>> > if (ret)
>> > return ret;
>> >
>> > @@ -717,15 +735,18 @@ static int vc4_plane_mode_set(struct drm_plane
>> > *plane,
>> > vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
>> > }
>> >
>> > + vc4_state->lbm_offset = 0;
>> > +
>> > if (vc4_state->x_scaling[0] != VC4_SCALING_NONE ||
>> > vc4_state->x_scaling[1] != VC4_SCALING_NONE ||
>> > vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
>> > vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
>> > - /* LBM Base Address. */
>> > + /* Reserve a slot for the LBM Base Address. The real value will
>> > + * be set when calling vc4_plane_update_lbm().
>> > + */
>> > if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
>> > - vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
>> > - vc4_dlist_write(vc4_state, vc4_state->lbm.start);
>> > - }
>> > + vc4_state->y_scaling[1] != VC4_SCALING_NONE)
>> > + vc4_state->lbm_offset = vc4_state->dlist_count++;
>> >
>> > if (num_planes > 1) {
>> > /* Emit Cb/Cr as channel 0 and Y as channel
>> > @@ -785,13 +806,18 @@ static int vc4_plane_atomic_check(struct drm_plane
>> > *plane,
>> > struct drm_plane_state *state)
>> > {
>> > struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
>> > + int ret;
>> >
>> > vc4_state->dlist_count = 0;
>> >
>> > - if (plane_enabled(state))
>> > - return vc4_plane_mode_set(plane, state);
>> > - else
>> > + if (!plane_enabled(state))
>> > return 0;
>> > +
>> > + ret = vc4_plane_mode_set(plane, state);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + return vc4_plane_update_lbm(state);
>> > }
>>
>> Couldn't you call update_lbm() (maybe called allocate_lbm()) first, and
>> then leave the dlist setup as is without needing lbm_offset?
>
> I'll anyway need lbm_offset for the dlist check I do in async_check().Fair enough. Reviewed-by: Eric Anholt <e...@anholt.net>
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
