On Fri, Dec 07, 2018 at 09:24:10PM +0000, Russell King wrote:
> The binding document for this device says that all GPIOs are optional,
> but the driver fails to bind on OMAP3 LDP, reporting:
>
> panel-sharp-ls037v7dw01: probe of display failed with error -2
>
> Unfortunately, commit ca8c67dafdb7 ("fbdev: omap2: improve usage of
> gpiod API") removed the -ENOENT handling without converting the
> gpiod function to use the optional variant, causing all GPIOs to become
> mandatory.
>
> Since the LDP hard-wires some of the panel control signals, there are
> no GPIOs that could be specified in DT to satisfy this.
>
> Switch the driver to use the devm_gpiod_get_index_optional() rather
> than devm_gpiod_get_index() to conform to its binding documentation.
>
> Fixes: ca8c67dafdb7 ("fbdev: omap2: improve usage of gpiod API")
> Signed-off-by: Russell King <[email protected]>
Right, it seems I missed that the GPIOs were optional before
ca8c67dafdb7. Thanks for catching (and sorry for having to catch).
Acked-by: Uwe Kleine-König <[email protected]>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
