-----Original Message-----
From: dri-devel [mailto:dri-devel-boun...@lists.freedesktop.org] On Behalf Of
Ville Syrjälä
Sent: Tuesday, January 29, 2019 9:14 PM
To: Shankar, Uma <uma.shan...@intel.com>
Cc: emil.l.veli...@gmail.com; intel-...@lists.freedesktop.org; Syrjala, Ville
<ville.syrj...@intel.com>; Lankhorst, Maarten <maarten.lankho...@intel.com>;
dri-devel@lists.freedesktop.org
Subject: Re: [v8 2/2] drm/i915: Attach colorspace property and enable modeset
On Tue, Jan 29, 2019 at 09:22:56PM +0530, Uma Shankar wrote:
This patch attaches the colorspace connector property to the hdmi
connector. Based on colorspace change, modeset will be triggered to
switch to new colorspace.
Based on colorspace property value create an infoframe with
appropriate colorspace. This can be used to send an infoframe packet
with proper colorspace value set which will help to enable wider color
gamut like BT2020 on sink.
This patch attaches and enables HDMI colorspace, DP will be taken care
separately.
v2: Merged the changes of creating infoframe as well to this patch as
per Maarten's suggestion.
v3: Addressed review comments from Shashank. Separated HDMI and DP
colorspaces as suggested by Ville and Maarten.
v4: Addressed Chris and Ville's review comments, and created a common
colorspace property for DP and HDMI, filtered the list based on the
colorspaces supported by the respective protocol standard. Handle the
default case properly.
v5: Added Platform specific colorspace enums and called the property
creation helper using the same.
v6: Addressed Shashank's review comments.
v7: Rebase
v8: Addressed Maarten's review comments.
Signed-off-by: Uma Shankar <uma.shan...@intel.com>
Reviewed-by: Shashank Sharma <shashank.sha...@intel.com>
---
drivers/gpu/drm/i915/intel_atomic.c | 1 +
drivers/gpu/drm/i915/intel_connector.c | 63
++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 24 +++++++++++++
4 files changed, 89 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c
b/drivers/gpu/drm/i915/intel_atomic.c
index 16263ad..76b7114 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct
drm_connector *conn,
*/
if (new_conn_state->force_audio != old_conn_state->force_audio ||
new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb
||
+ new_state->colorspace != old_state->colorspace ||
new_conn_state->base.picture_aspect_ratio != old_conn_state-
base.picture_aspect_ratio ||
new_conn_state->base.content_type != old_conn_state-
base.content_type ||
new_conn_state->base.scaling_mode !=
old_conn_state->base.scaling_mode)
diff --git a/drivers/gpu/drm/i915/intel_connector.c
b/drivers/gpu/drm/i915/intel_connector.c
index ee16758..9a12d5e 100644
--- a/drivers/gpu/drm/i915/intel_connector.c
+++ b/drivers/gpu/drm/i915/intel_connector.c
@@ -30,6 +30,48 @@
#include "intel_drv.h"
#include "i915_drv.h"
+static const struct drm_prop_enum_list gen10_hdmi_colorspaces[] = {
+ /* For Default case, driver will set the colorspace */
+ { DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { DRM_MODE_COLORIMETRY_ITU_601, "ITU_601" },
+ { DRM_MODE_COLORIMETRY_ITU_709, "ITU_709" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { DRM_MODE_COLORIMETRY_S_YCC_601, "S_YCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" }, };
+
+static const struct drm_prop_enum_list legacy_hdmi_colorspaces[] = {
+ /* For Default case, driver will set the colorspace */
+ { DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { DRM_MODE_COLORIMETRY_ITU_601, "ITU_601" },
+ { DRM_MODE_COLORIMETRY_ITU_709, "ITU_709" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { DRM_MODE_COLORIMETRY_S_YCC_601, "S_YCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" }, };
Why are we duplicating these in the driver code? And why do we have different
sets for gen10 and older?
