Am 26.02.19 um 16:58 schrieb Daniel Vetter:
On Wed, Feb 13, 2019 at 9:35 AM Christian König
<ckoenig.leichtzumer...@gmail.com> wrote:
Am 13.02.19 um 08:59 schrieb Daniel Vetter:
On Wed, Feb 13, 2019 at 2:44 AM Rob Herring <r...@kernel.org> wrote:
On Tue, Feb 12, 2019 at 7:00 PM Eric Anholt <e...@anholt.net> wrote:
Rob Herring <r...@kernel.org> writes:
On Thu, Feb 7, 2019 at 9:51 AM Daniel Vetter <dan...@ffwll.ch> wrote:
On Thu, Feb 07, 2019 at 11:21:52PM +0800, Qiang Yu wrote:
On Thu, Feb 7, 2019 at 5:09 PM Daniel Vetter <dan...@ffwll.ch> wrote:
On Wed, Feb 06, 2019 at 09:14:55PM +0800, Qiang Yu wrote:
Kernel DRM driver for ARM Mali 400/450 GPUs.
Since last RFC, all feedback has been addressed. Most Mali DTS
changes are already upstreamed by SoC maintainers. The kernel
driver and user-kernel interface are quite stable for several
months, so I think it's ready to be upstreamed.
This implementation mainly take amdgpu DRM driver as reference.
- Mali 4xx GPUs have two kinds of processors GP and PP. GP is for
OpenGL vertex shader processing and PP is for fragment shader
processing. Each processor has its own MMU so prcessors work in
virtual address space.
- There's only one GP but multiple PP (max 4 for mali 400 and 8
for mali 450) in the same mali 4xx GPU. All PPs are grouped
togather to handle a single fragment shader task divided by
FB output tiled pixels. Mali 400 user space driver is
responsible for assign target tiled pixels to each PP, but mali
450 has a HW module called DLBU to dynamically balance each
PP's load.
- User space driver allocate buffer object and map into GPU
virtual address space, upload command stream and draw data with
CPU mmap of the buffer object, then submit task to GP/PP with
a register frame indicating where is the command stream and misc
settings.
- There's no command stream validation/relocation due to each user
process has its own GPU virtual address space. GP/PP's MMU switch
virtual address space before running two tasks from different
user process. Error or evil user space code just get MMU fault
or GP/PP error IRQ, then the HW/SW will be recovered.
- Use TTM as MM. TTM_PL_TT type memory is used as the content of
lima buffer object which is allocated from TTM page pool. all
lima buffer object gets pinned with TTM_PL_FLAG_NO_EVICT when
allocation, so there's no buffer eviction and swap for now.
All other render gpu drivers that have unified memory (aka is on the SoC)
use GEM directly, with some of the helpers we have. So msm, etnaviv, vc4
(and i915 is kinda the same too really). TTM makes sense if you have some
discrete memory to manage, but imo not in any other place really.
What's the design choice behind this?
To be honest, it's just because TTM offers more helpers. I did implement
a GEM way with cma alloc at the beginning. But when implement paged mem,
I found TTM has mem pool alloc, sync and mmap related helpers which covers
much of my existing code. It's totally possible with GEM, but not as easy as
TTM to me. And virtio-gpu seems an example to use TTM without discrete
mem. Shouldn't TTM a super set of both unified mem and discrete mem?
virtio does have fake vram and migration afaiui. And sure, you can use TTM
without the vram migration, it's just that most of the complexity of TTM
is due to buffer placement and migration and all that stuff. If you never
need to move buffers, then you don't need that ever.
Wrt lack of helpers, what exactly are you looking for? A big part of these
for TTM is that TTM is a bid a midlayer, so reinvents a bunch of things
provided by e.g. dma-api. It's cleaner to use the dma-api directly. Basing
the lima kernel driver on vc4, freedreno or etnaviv (last one is probably
closest, since it doesn't have a display block either) would be better I
think.
FWIW, I'm working on the panfrost driver and am using the shmem
helpers from Noralf. It's the early stages though. I started a patch
for etnaviv to use it too, but found I need to rework it to sub-class
the shmem GEM object.
Did you just convert the shmem helpers over to doing alloc_coherent? If
so, I'd be interested in picking them up for v3d, and that might help
get another patch out of your stack.
I haven't really fully addressed that yet, but yeah, my plan is just
to switch to WC alloc and mappings. I was going to try to make it
configurable, but there is a comment in the ARM dma mapping code which
makes me wonder if tinydrm using streaming DMA for SPI is
fundamentally broken (and maybe CMA is less broken?). If not broken,
not guaranteed to work.
/*
* The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
* that the intention is to allow exporting memory allocated via the
* coherent DMA APIs through the dma_buf API, which only accepts a
* scattertable. This presents a couple of problems:
* 1. Not all memory allocated via the coherent DMA APIs is backed by
* a struct page
* 2. Passing coherent DMA memory into the streaming APIs is not allowed
* as we will try to flush the memory through a different alias to that
* actually being used (and the flushes are redundant.)
*/
The sg table is only for device access, which avoids both of these
issues. That's the idea at least, except all ttm-based drivers don't
care, instead they expect a struct page and then use that to build a
ttm_bo. And then use all the ttm cpu side access functions, instead of
using the dma-buf interfaces (which need to exist to avoid the above
issues).
Actually that is not correct any more. I've fixed this while working on
directly sharing BOs between amdgpu devices.
TTM now uses the DMA addresses from the sg table and I actually wanted
to remove the pages for imported DMA-buf BOs for a while now.
Finally gotten around to reading ttm code to update my understanding,
and I think I realized why I never realized this changed:
TTM_PAGE_FLAG_SG and related code seems to be the fancy new code you
added to go sg table native in ttm, and from a quick look rolled out
everywhere. But drm_prime_sg_to_page_addr_arrays is still called. Is
that the missing cleanup you're referring to?
Yes, exactly. The last thing I pushed upstream was making the pages
optional in drm_prime_sg_to_page_addr_arrays.
I just never got around to really not fill ttm->pages any more, but in
theory it should be possible to just comment that out and be happy about it.
Christian.
Would be nice if we
could nuke it to stop the copypasta spread (and spreading it seems to
do :-/). Maybe as a todo.rst entry?
Cheers, Daniel
Regards,
Christian.
So except if you want to fix ttm dma-buf import (which is going to be
a pile of work), add this to the list of why ttm is probably not the
best choice for something mostly running on arm soc. x86 gets away
because dma is easy on x86.
-Daniel
I'm particularly interested in the shmem helpers because I should start
doing dynamic binding in and out of the GPU's page table, to avoid
pinning so much memory all the time.
I'll try to post something in the next couple of days.
Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
