The R-Car DU driver assumes that a bridge is always connected to the DU
output. This is valid for the LVDS and HDMI outputs, but the DPAD
outputs can be connected directly to a panel, in which case no bridge is
available.
To support this use case, detect whether the entities connected to the
DU DPAD outputs are encoders or panels based on the number of ports of
their DT node, and retrieve the corresponding type of DRM objects. For
panels, additionally create panel bridge instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
Tested-by: Kevin Key <kevin....@gentex.com>
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
---
drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 54 ++++++++++++++++++++---
1 file changed, 48 insertions(+), 6 deletions(-)
Changes since v1:
- Fix of_node_put() call in rcar_du_encoder_count_ports(), release the
reference to ports, not to node
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 8ee4e762f4e5..6c91753af7bc 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -28,13 +28,33 @@ static const struct drm_encoder_funcs encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
+static unsigned int rcar_du_encoder_count_ports(struct device_node *node)
+{
+ struct device_node *ports;
+ struct device_node *port;
+ unsigned int num_ports = 0;
+
+ ports = of_get_child_by_name(node, "ports");
+ if (!ports)
+ ports = of_node_get(node);
+
+ for_each_child_of_node(ports, port) {
+ if (of_node_name_eq(port, "port"))
+ num_ports++;
+ }
+
+ of_node_put(ports);
+
+ return num_ports;
+}
+
int rcar_du_encoder_init(struct rcar_du_device *rcdu,
enum rcar_du_output output,
struct device_node *enc_node)
{
struct rcar_du_encoder *renc;
struct drm_encoder *encoder;
- struct drm_bridge *bridge = NULL;
+ struct drm_bridge *bridge;
int ret;
renc = devm_kzalloc(rcdu->dev, sizeof(*renc), GFP_KERNEL);
@@ -48,11 +68,33 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
enc_node, output);
- /* Locate the DRM bridge from the encoder DT node. */
- bridge = of_drm_find_bridge(enc_node);
- if (!bridge) {
- ret = -EPROBE_DEFER;
- goto done;
+ /*
+ * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
+ * DT node has a single port, assume that it describes a panel and
+ * create a panel bridge.
+ */
+ if ((output == RCAR_DU_OUTPUT_DPAD0 ||
+ output == RCAR_DU_OUTPUT_DPAD1) &&
+ rcar_du_encoder_count_ports(enc_node) == 1) {
+ struct drm_panel *panel = of_drm_find_panel(enc_node);
+
+ if (IS_ERR(panel)) {
+ ret = PTR_ERR(panel);
+ goto done;
+ }
+
+ bridge = devm_drm_panel_bridge_add(rcdu->dev, panel,
+ DRM_MODE_CONNECTOR_DPI);
+ if (IS_ERR(bridge)) {
+ ret = PTR_ERR(bridge);
+ goto done;
+ }
+ } else {
+ bridge = of_drm_find_bridge(enc_node);
+ if (!bridge) {
+ ret = -EPROBE_DEFER;
+ goto done;
+ }
}
ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
