DMT monitors does not necessarely report a maximum TMDS clock
in a VSDB EDID extension.
In this case, all modes are wrongly rejected, including
the DRM fallback EDID.
This patch only rejects modes whith clock > max_tmds_clock if
the max_tmds_clock is specified. This will only reject
4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.
Reported-by: Maxime Jourdan <mjour...@baylibre.com>
Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode")
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c
b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index e28814f4ea6c..563953ec6ad0 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -569,7 +569,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
/* If sink max TMDS clock, we reject the mode */
- if (mode->clock > connector->display_info.max_tmds_clock)
+ if (connector->display_info.max_tmds_clock &&
+ mode->clock > connector->display_info.max_tmds_clock)
return MODE_BAD;
/* Check against non-VIC supported modes */
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
