This describes the ASPEED BMC SoC's display controller.
Signed-off-by: Joel Stanley <j...@jms.id.au>
Reviewed-by: Andrew Jeffery <and...@aj.id.au>
---
v3:
Add Andrew's reviewed-by
.../devicetree/bindings/gpu/aspeed-gfx.txt | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
new file mode 100644
index 000000000000..a74033332668
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
@@ -0,0 +1,41 @@
+Device tree configuration for the GFX display deivce on the AST2500 SoCs.
+
+Required properties:
+ - compatible
+ * Must be one of the following:
+ + aspeed,ast2500-gfx
+ + aspeed,ast2400-gfx
+ * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
+ be present
+
+ - reg: Physical base address and length of the GFX registers
+
+ - interrupts: interrupt number for the GFX device
+
+ - clocks: clock number used to generate the pixel clock
+
+ - resets: reset line that must be released to use the GFX device
+
+ - memory-region:
+ Phandle to a memory region to allocate from, as defined in
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+
+Example:
+
+gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_CRT1>;
+ interrupts = <0x19>;
+ memory-region = <&gfx_memory>;
+};
+
+gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+};
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
