[PATCH 04/12] arm64: dts: allwinner: orange-pi-3: Enable HDMI output

[megous]

From: Ondrej Jirman <meg...@megous.com>

Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables
the DDC I2C bus. Before EDID can be read, we need to pull PH2 high.

Signed-off-by: Ondrej Jirman <meg...@megous.com>
---
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 7a2424fcaed7..644946749088 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -21,6 +21,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -36,6 +47,15 @@
                };
        };
 
+       reg_ddc: ddc-io {
+                compatible = "regulator-fixed";
+                regulator-name = "ddc-io";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                enable-active-high;
+                gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+        };
+
        reg_vcc5v: vcc5v {
                /* board wide 5V supply directly from the DC jack */
                compatible = "regulator-fixed";
@@ -50,6 +70,10 @@
        cpu-supply = <&reg_dcdca>;
 };
 
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -58,6 +82,17 @@
        status = "okay";
 };
 
+&hdmi {
+       ddc-supply = <&reg_ddc>;
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins>;
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel