A lot of root complexes can still do P2P even when PCI devices
don't share a common upstream bridge.

Start adding a whitelist and allow P2P if both participants are
attached to known good root complex.

Signed-off-by: Christian König <christian.koe...@amd.com>
---
 drivers/pci/p2pdma.c | 38 +++++++++++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index c52298d76e64..212baaa7f93b 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -274,6 +274,31 @@ static void seq_buf_print_bus_devfn(struct seq_buf *buf, 
struct pci_dev *pdev)
        seq_buf_printf(buf, "%s;", pci_name(pdev));
 }
 
+/*
+ * If we can't find a common upstream bridge take a look at the root complex 
and
+ * compare it to a whitelist of known good hardware.
+ */
+static bool root_complex_whitelist(struct pci_dev *dev)
+{
+       struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+       struct pci_dev *root = pci_get_slot(host->bus, PCI_DEVFN(0, 0));
+       unsigned short vendor, device;
+
+       if (!root)
+               return false;
+
+       vendor = root->vendor;
+       device = root->device;
+       pci_dev_put(root);
+
+       /* AMD ZEN host bridges can do peer to peer */
+       if (vendor == PCI_VENDOR_ID_AMD && device == 0x1450)
+               return true;
+
+       /* TODO: Extend that to a proper whitelist */
+       return false;
+}
+
 /*
  * Find the distance through the nearest common upstream bridge between
  * two PCI devices.
@@ -317,13 +342,13 @@ static void seq_buf_print_bus_devfn(struct seq_buf *buf, 
struct pci_dev *pdev)
  * In this case, a list of all infringing bridge addresses will be
  * populated in acs_list (assuming it's non-null) for printk purposes.
  */
-static int upstream_bridge_distance(struct pci_dev *a,
-                                   struct pci_dev *b,
+static int upstream_bridge_distance(struct pci_dev *provider,
+                                   struct pci_dev *client,
                                    struct seq_buf *acs_list)
 {
+       struct pci_dev *a = provider, *b = client, *bb;
        int dist_a = 0;
        int dist_b = 0;
-       struct pci_dev *bb = NULL;
        int acs_cnt = 0;
 
        /*
@@ -354,6 +379,13 @@ static int upstream_bridge_distance(struct pci_dev *a,
                dist_a++;
        }
 
+       /* Allow the connection if both devices are on a whitelisted root
+        * complex, but add an arbitary large value to the distance.
+        */
+       if (root_complex_whitelist(provider) &&
+           root_complex_whitelist(client))
+               return 0x1000 + dist_a + dist_b;
+
        return -1;
 
 check_b_path_acs:
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to