Getting rotation info is cheap so we can do it on demand.
This is done in preparation for the removal of struct drm_fb_helper_crtc.
Cc: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
Acked-by: Daniel Vetter <daniel.vet...@ffwll.ch>
Reviewed-by: Maxime Ripard <maxime.rip...@bootlin.com>
---
drivers/gpu/drm/drm_fb_helper.c | 131 ++++++++++++++++----------------
include/drm/drm_fb_helper.h | 8 --
2 files changed, 65 insertions(+), 74 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 578428461391..1c70ecb84738 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -388,6 +388,49 @@ int drm_fb_helper_debug_leave(struct fb_info *info)
}
EXPORT_SYMBOL(drm_fb_helper_debug_leave);
+/* Check if the plane can hw rotate to match panel orientation */
+static bool drm_fb_helper_panel_rotation(struct drm_mode_set *modeset,
+ unsigned int *rotation)
+{
+ struct drm_connector *connector = modeset->connectors[0];
+ struct drm_plane *plane = modeset->crtc->primary;
+ u64 valid_mask = 0;
+ unsigned int i;
+
+ if (!modeset->num_connectors)
+ return false;
+
+ switch (connector->display_info.panel_orientation) {
+ case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+ *rotation = DRM_MODE_ROTATE_180;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+ *rotation = DRM_MODE_ROTATE_90;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+ *rotation = DRM_MODE_ROTATE_270;
+ break;
+ default:
+ *rotation = DRM_MODE_ROTATE_0;
+ }
+
+ /*
+ * TODO: support 90 / 270 degree hardware rotation,
+ * depending on the hardware this may require the framebuffer
+ * to be in a specific tiling format.
+ */
+ if (*rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property)
+ return false;
+
+ for (i = 0; i < plane->rotation_property->num_values; i++)
+ valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+ if (!(*rotation & valid_mask))
+ return false;
+
+ return true;
+}
+
static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool
active)
{
struct drm_device *dev = fb_helper->dev;
@@ -428,10 +471,13 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper
*fb_helper, bool activ
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set =
&fb_helper->crtc_info[i].mode_set;
struct drm_plane *primary = mode_set->crtc->primary;
+ unsigned int rotation;
- /* Cannot fail as we've already gotten the plane state above */
- plane_state = drm_atomic_get_new_plane_state(state, primary);
- plane_state->rotation = fb_helper->crtc_info[i].rotation;
+ if (drm_fb_helper_panel_rotation(mode_set, &rotation)) {
+ /* Cannot fail as we've already gotten the plane state
above */
+ plane_state = drm_atomic_get_new_plane_state(state,
primary);
+ plane_state->rotation = rotation;
+ }
ret = __drm_atomic_helper_set_config(mode_set, state);
if (ret != 0)
@@ -871,7 +917,6 @@ int drm_fb_helper_init(struct drm_device *dev,
if (!fb_helper->crtc_info[i].mode_set.connectors)
goto out_free;
fb_helper->crtc_info[i].mode_set.num_connectors = 0;
- fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
}
i = 0;
@@ -2500,62 +2545,6 @@ static int drm_pick_crtcs(struct drm_fb_helper
*fb_helper,
return best_score;
}
-/*
- * This function checks if rotation is necessary because of panel orientation
- * and if it is, if it is supported.
- * If rotation is necessary and supported, it gets set in fb_crtc.rotation.
- * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
- * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
- * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
- * the unsupported rotation.
- */
-static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
- struct drm_fb_helper_crtc *fb_crtc,
- struct drm_connector *connector)
-{
- struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
- uint64_t valid_mask = 0;
- int i, rotation;
-
- fb_crtc->rotation = DRM_MODE_ROTATE_0;
-
- switch (connector->display_info.panel_orientation) {
- case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
- rotation = DRM_MODE_ROTATE_180;
- break;
- case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
- rotation = DRM_MODE_ROTATE_90;
- break;
- case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
- rotation = DRM_MODE_ROTATE_270;
- break;
- default:
- rotation = DRM_MODE_ROTATE_0;
- }
-
- /*
- * TODO: support 90 / 270 degree hardware rotation,
- * depending on the hardware this may require the framebuffer
- * to be in a specific tiling format.
- */
- if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
- fb_helper->sw_rotations |= rotation;
- return;
- }
-
- for (i = 0; i < plane->rotation_property->num_values; i++)
- valid_mask |= (1ULL << plane->rotation_property->values[i]);
-
- if (!(rotation & valid_mask)) {
- fb_helper->sw_rotations |= rotation;
- return;
- }
-
- fb_crtc->rotation = rotation;
- /* Rotating in hardware, fbcon should not rotate */
- fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
-}
-
static struct drm_fb_helper_crtc *
drm_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
{
@@ -2801,7 +2790,6 @@ static void drm_setup_crtcs(struct drm_fb_helper
*fb_helper,
drm_fb_helper_modeset_release(fb_helper,
&fb_helper->crtc_info[i].mode_set);
- fb_helper->sw_rotations = 0;
drm_fb_helper_for_each_connector(fb_helper, i) {
struct drm_display_mode *mode = modes[i];
struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2821,7 +2809,6 @@ static void drm_setup_crtcs(struct drm_fb_helper
*fb_helper,
modeset->mode = drm_mode_duplicate(dev,
fb_crtc->desired_mode);
drm_connector_get(connector);
- drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
modeset->connectors[modeset->num_connectors++] =
connector;
modeset->x = offset->x;
modeset->y = offset->y;
@@ -2844,11 +2831,23 @@ static void drm_setup_crtcs(struct drm_fb_helper
*fb_helper,
static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
{
struct fb_info *info = fb_helper->fbdev;
+ unsigned int rotation, sw_rotations = 0;
int i;
- for (i = 0; i < fb_helper->crtc_count; i++)
- if (fb_helper->crtc_info[i].mode_set.num_connectors)
- fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
+ for (i = 0; i < fb_helper->crtc_count; i++) {
+ struct drm_mode_set *modeset =
&fb_helper->crtc_info[i].mode_set;
+
+ if (!modeset->num_connectors)
+ continue;
+
+ modeset->fb = fb_helper->fb;
+
+ if (drm_fb_helper_panel_rotation(modeset, &rotation))
+ /* Rotating in hardware, fbcon should not rotate */
+ sw_rotations |= DRM_MODE_ROTATE_0;
+ else
+ sw_rotations |= rotation;
+ }
mutex_lock(&fb_helper->dev->mode_config.mutex);
drm_fb_helper_for_each_connector(fb_helper, i) {
@@ -2864,7 +2863,7 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper
*fb_helper)
}
mutex_unlock(&fb_helper->dev->mode_config.mutex);
- switch (fb_helper->sw_rotations) {
+ switch (sw_rotations) {
case DRM_MODE_ROTATE_0:
info->fbcon_rotate_hint = FB_ROTATE_UR;
break;
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 40af2866c26a..b0a14aef2e39 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -51,7 +51,6 @@ struct drm_fb_helper_crtc {
struct drm_mode_set mode_set;
struct drm_display_mode *desired_mode;
int x, y;
- int rotation;
};
/**
@@ -151,13 +150,6 @@ struct drm_fb_helper {
struct drm_fb_helper_crtc *crtc_info;
int connector_count;
int connector_info_alloc_count;
- /**
- * @sw_rotations:
- * Bitmask of all rotations requested for panel-orientation which
- * could not be handled in hardware. If only one bit is set
- * fbdev->fbcon_rotate_hint gets set to the requested rotation.
- */
- int sw_rotations;
/**
* @connector_info:
*
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
