Hi Laurent,
On Sun, May 12, 2019 at 12:06:55AM +0300, Laurent Pinchart wrote:
> Set a drm_bridge_timings in the drm_bridge, and use it to report the
> input bus mode (single-link or dual-link). The other fields of the
> timings structure are kept to 0 as they do not apply to LVDS buses.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
> ---
> Changes since v1:
>
> - Ignore disabled remote device
> ---
> drivers/gpu/drm/bridge/thc63lvd1024.c | 54 +++++++++++++++++++++------
> 1 file changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c
> b/drivers/gpu/drm/bridge/thc63lvd1024.c
> index b083a740565c..709dd28b43d6 100644
> --- a/drivers/gpu/drm/bridge/thc63lvd1024.c
> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> @@ -31,6 +31,8 @@ struct thc63_dev {
>
> struct drm_bridge bridge;
> struct drm_bridge *next;
> +
> + struct drm_bridge_timings timings;
> };
>
> static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
> @@ -48,15 +50,28 @@ static int thc63_attach(struct drm_bridge *bridge)
> static enum drm_mode_status thc63_mode_valid(struct drm_bridge *bridge,
> const struct drm_display_mode *mode)
> {
> + struct thc63_dev *thc63 = to_thc63(bridge);
> + unsigned int min_freq;
> + unsigned int max_freq;
> +
> /*
> - * The THC63LVD1024 clock frequency range is 8 to 135 MHz in single-in
> - * mode. Note that the limits are different in dual-in, single-out mode,
> - * and will need to be adjusted accordingly.
> + * The THC63LVD1024 pixel rate range is 8 to 135 MHz in all modes but
> + * dual-in, single-out where it is 40 to 150 MHz. As dual-in, dual-out
> + * isn't supported by the driver yet, simply derive the limits from the
> + * input mode.
> */
> - if (mode->clock < 8000)
> + if (thc63->timings.dual_link) {
> + min_freq = 40000;
> + max_freq = 150000;
> + } else {
> + min_freq = 8000;
> + max_freq = 135000;
> + }
> +
> + if (mode->clock < min_freq)
> return MODE_CLOCK_LOW;
>
> - if (mode->clock > 135000)
> + if (mode->clock > max_freq)
> return MODE_CLOCK_HIGH;
I would have made a separate patch for this bit, anyway, verified
against the THC631024 manual, and this matches my understanding.
>
> return MODE_OK;
> @@ -101,19 +116,19 @@ static const struct drm_bridge_funcs thc63_bridge_func
> = {
>
> static int thc63_parse_dt(struct thc63_dev *thc63)
> {
> - struct device_node *thc63_out;
> + struct device_node *endpoint;
> struct device_node *remote;
>
> - thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
> - THC63_RGB_OUT0, -1);
> - if (!thc63_out) {
> + endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
> + THC63_RGB_OUT0, -1);
> + if (!endpoint) {
> dev_err(thc63->dev, "Missing endpoint in port@%u\n",
> THC63_RGB_OUT0);
> return -ENODEV;
> }
>
> - remote = of_graph_get_remote_port_parent(thc63_out);
> - of_node_put(thc63_out);
> + remote = of_graph_get_remote_port_parent(endpoint);
> + of_node_put(endpoint);
> if (!remote) {
> dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
> THC63_RGB_OUT0);
> @@ -132,6 +147,22 @@ static int thc63_parse_dt(struct thc63_dev *thc63)
> if (!thc63->next)
> return -EPROBE_DEFER;
>
> + endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
> + THC63_LVDS_IN1, -1);
> + if (endpoint) {
> + remote = of_graph_get_remote_port_parent(endpoint);
> + of_node_put(endpoint);
> +
> + if (remote) {
> + if (of_device_is_available(remote))
> + thc63->timings.dual_link = true;
> + of_node_put(remote);
> + }
> + }
> +
> + dev_dbg(thc63->dev, "operating in %s-link mode\n",
> + thc63->timings.dual_link ? "dual" : "single");
> +
Fine, thanks for having addressed comments on the RFC.
Reviewed-by: Jacopo Mondi <jac...@jmondi.org>
Thanks
j
> return 0;
> }
>
> @@ -188,6 +219,7 @@ static int thc63_probe(struct platform_device *pdev)
> thc63->bridge.driver_private = thc63;
> thc63->bridge.of_node = pdev->dev.of_node;
> thc63->bridge.funcs = &thc63_bridge_func;
> + thc63->bridge.timings = &thc63->timings;
>
> drm_bridge_add(&thc63->bridge);
>
> --
> Regards,
>
> Laurent Pinchart
>
signature.asc
Description: PGP signature
