Hi Laurent.
On Tue, May 28, 2019 at 05:12:31PM +0300, Laurent Pinchart wrote:
> In dual-link LVDS mode, the LVDS1 encoder is used as a companion for
> LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1
> can't be used in that case, don't create an encoder and connector for
> it.
>
> Signed-off-by: Laurent Pinchart <[email protected]>
> Reviewed-by: Jacopo Mondi <[email protected]>
> Tested-by: Jacopo Mondi <[email protected]>
> ---
> Changess since v2:
>
> - Remove unneeded bridge NULL check
> ---
> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 12 ++++++++++++
> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 +-
> 2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> index 6c91753af7bc..0f00bdfe2366 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> @@ -16,6 +16,7 @@
> #include "rcar_du_drv.h"
> #include "rcar_du_encoder.h"
> #include "rcar_du_kms.h"
> +#include "rcar_lvds.h"
>
> /*
> -----------------------------------------------------------------------------
> * Encoder
> @@ -97,6 +98,17 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
> }
> }
>
> + /*
> + * On Gen3 skip the LVDS1 output if the LVDS1 encoder is used as a
> + * companion for LVDS0 in dual-link mode.
> + */
> + if (rcdu->info->gen >= 3 && output == RCAR_DU_OUTPUT_LVDS1) {
Both subject and comment above says "On Gen3", but the code looks like
it implements "On Gen3 or newer" - due to use of ">=".
Looks wrong to me.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
