On Fri, May 31, 2019 at 12:29 PM Maxime Ripard <maxime.rip...@bootlin.com> wrote: > > On Wed, May 29, 2019 at 04:26:07PM +0530, Jagan Teki wrote: > > The MIPI DSI controller in Allwinner A64 is similar to A33. > > > > But unlike A33, A64 doesn't have DSI_SCLK gating so it is valid > > to with separate compatible for A64 on the same driver. > > > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > > Reviewed-by: Rob Herring <r...@kernel.org> > > Tested-by: Merlijn Wajer <merl...@wizzup.org> > > --- > > Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt > > b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt > > index 1cc40663b7a2..9877398be69a 100644 > > --- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt > > +++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt > > @@ -12,6 +12,7 @@ The DSI Encoder generates the DSI signal from the TCON's. > > Required properties: > > - compatible: value must be one of: > > * allwinner,sun6i-a31-mipi-dsi > > + * allwinner,sun50i-a64-mipi-dsi > > - reg: base address and size of memory-mapped region > > - interrupts: interrupt associated to this IP > > - clocks: phandles to the clocks feeding the DSI encoder > > We've switch to YAML now, and the compatible should be expressed that > way now:
Yes, I have seen it few days back will update on top of that, thanks! _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel